Cold Chisels, Bolsters & Scutch Chisels, Builders & Contractors Tools, Hand Tools on Wokingham Tools


Home	About Us	Contact Us	Help

Cold Chisels, Bolsters & Scutch Chisels

Hand Tools > Builders & Contractors Tools > Cold Chisels, Bolsters & Scutch Chisels

Returned 76 Results

Faithfull Black Protective Grip 3/4in

Designed to be fitted on to cold chisels, bolsters or flooring chisels.Gives protection to the hand from mis-directed hammer blows.To fit Size. 3/4in ... More Info

£4.02 INC VAT

Faithfull Black Protective Grip 5/8in

Designed to be fitted on to cold chisels, bolsters or flooring chisels.Gives protection to the hand from mis-directed hammer blows.To fit Size. 5/8in ... More Info

£4.02 INC VAT

Faithfull Black Protective Grip 7/8in

Designed to be fitted on to cold chisels, bolsters or flooring chisels.Gives protection to the hand from mis-directed hammer blows.To fit Size. 7/8in ... More Info

£4.02 INC VAT

Faithfull Brick Bolster 3in x 12in

Manufactured for cutting bricks during building work.This chisel has a suitably hardened cutting edge, but should not be used on concrete containing r... More Info

£7.02 INC VAT

Faithfull Chisel Bits (Box 25) 1in

Used in scutch comb holders when cutting and chipping masonry or brickwork, they are sometimes described as droves.Size 1inBox 25... More Info

£12.14 INC VAT

Faithfull Chisel Bits (Pack 5) 1.1/2in

Used in scutch comb holders when cutting and chipping masonry or brickwork, they are sometimes described as droves.Size 1.1/2inPack 5... More Info

£4.31 INC VAT

Faithfull Chisel Bits (Pack 5) 1in

Used in scutch comb holders when cutting and chipping masonry or brickwork, they are sometimes described as droves.Size 1in Pack 5... More Info

£4.91 INC VAT

Faithfull Chisel Bits (Pack 5) 2in

Used in scutch comb holders when cutting and chipping masonry or brickwork, they are sometimes described as droves.Size 2inPack 5... More Info

£5.01 INC VAT

Faithfull Cold Chisel 10in x 1/2in F0026

Manufactured from octagon steel, used for cutting small section steel, brick and concrete.Cutting edge with approximately 60 degree angle.Size. 10in x... More Info

£3.03 INC VAT

Faithfull Cold Chisel 10in x 1in - Pre Pack

Manufactured from octagon steel, used for cutting small section steel, brick and concrete.Cutting edge with approximately 60 degree angle.Size. 10in x... More Info

£7.10 INC VAT

Faithfull Cold Chisel 10in x 1in F0067

Manufactured from octagon steel, used for cutting small section steel, brick and concrete.Cutting edge with approximately 60 degree angle.Size. 10in x... More Info

£6.27 INC VAT

Faithfull Cold Chisel 10in x 3/4in F0047

Manufactured from octagon steel, used for cutting small section steel, brick and concrete.Cutting edge with approximately 60 degree angle.Size. 10in x... More Info

£3.82 INC VAT

Faithfull Cold Chisel 12in x 1/2in F0027

Manufactured from octagon steel, used for cutting small section steel, brick and concrete.Cutting edge with approximately 60 degree angle.Size. 12in x... More Info

£3.20 INC VAT

Faithfull Cold Chisel 12in x 1in - Pre Pack

Manufactured from octagon steel, used for cutting small section steel, brick and concrete.Cutting edge with approximately 60 degree angle.Size. 12in x... More Info

£8.11 INC VAT

Faithfull Cold Chisel 12in x 1in F0068

Manufactured from octagon steel, used for cutting small section steel, brick and concrete.Cutting edge with approximately 60 degree angle.Size. 12in x... More Info

£7.57 INC VAT

Faithfull Cold Chisel 12in x 1in with Grip F0068g

Manufactured from octagon steel, used for cutting small section steel, brick and concrete.Cutting edge with approximately 60 degree angle.Fitted with ... More Info

£10.20 INC VAT

Faithfull Cold Chisel 12in x 3/4in F0048

Manufactured from octagon steel, used for cutting small section steel, brick and concrete.Cutting edge with approximately 60 degree angle.Size. 12in x... More Info

£4.41 INC VAT

Faithfull Cold Chisel 18in x 1in F0071

Manufactured from octagon steel, used for cutting small section steel, brick and concrete.Cutting edge with approximately 60 degree angle.Size. 18in x... More Info

£11.11 INC VAT

Faithfull Cold Chisel 18in x 3/4in F0051

Manufactured from octagon steel, used for cutting small section steel, brick and concrete.Cutting edge with approximately 60 degree angle.Size. 18in x... More Info

£7.04 INC VAT

Faithfull Cold Chisel 24in x 1in F0073

Manufactured from octagon steel, used for cutting small section steel, brick and concrete.Cutting edge with approximately 60 degree angle.Size. 24in x... More Info

£16.80 INC VAT

Faithfull Cold Chisel 24in x 3/4in F0053

Manufactured from octagon steel, used for cutting small section steel, brick and concrete.Cutting edge with approximately 60 degree angle.Size. 24in x... More Info

£10.30 INC VAT

Faithfull Cold Chisel 4in x 1/4in F0001

Manufactured from octagon steel, used for cutting small section steel, brick and concrete.Cutting edge with approximately 60 degree angle.Size. 4in x ... More Info

£2.03 INC VAT

Faithfull Cold Chisel 5in x 3/8in F0010

Manufactured from octagon steel, used for cutting small section steel, brick and concrete.Cutting edge with approximately 60 degree angle.Size. 5in x ... More Info

£2.26 INC VAT

Faithfull Cold Chisel 6in x 1/2in F0022

Manufactured from octagon steel, used for cutting small section steel, brick and concrete.Cutting edge with approximately 60 degree angle.Size. 6in x ... More Info

£2.12 INC VAT

Faithfull Cold Chisel 6in x 1/4in F0003

Manufactured from octagon steel, used for cutting small section steel, brick and concrete.Cutting edge with approximately 60 degree angle.Size. 6in x ... More Info

£1.98 INC VAT

Faithfull Cold Chisel 8in x 1/2in F0024

Manufactured from octagon steel, used for cutting small section steel, brick and concrete.Cutting edge with approximately 60 degree angle.Size. 8in x ... More Info

£2.43 INC VAT

Faithfull Cold Chisel 8in x 1in F0065

Manufactured from octagon steel, used for cutting small section steel, brick and concrete.Cutting edge with approximately 60 degree angle.Size. 8in x ... More Info

£5.37 INC VAT

Faithfull Cold Chisel 8in x 3/4in - Pre Pack

Manufactured from octagon steel, used for cutting small section steel, brick and concrete.Cutting edge with approximately 60 degree angle.Size. 8in x ... More Info

£4.31 INC VAT

Faithfull Cold Chisel 8in x 3/4in F0045

Manufactured from octagon steel, used for cutting small section steel, brick and concrete.Cutting edge with approximately 60 degree angle.Size. 8in x ... More Info

£3.49 INC VAT

Faithfull Cold Chisel 9in x 1in Foo66

Manufactured from octagon steel, used for cutting small section steel, brick and concrete.Cutting edge with approximately 60 degree angle.Size. 9in x ... More Info

£6.63 INC VAT

Faithfull Concrete Point 12in x 1/4in F0433

Used for bursting concrete and brickwork.Channels in concrete flooring should be marked out with a suitable flat chisel, prior to using concrete point... More Info

£6.21 INC VAT

Faithfull F0391 Brick Bolster 3in with Grip

Manufactured for cutting bricks during building work.This chisel has a suitably hardened cutting edge, but should not be used on concrete containing r... More Info

£9.03 INC VAT

Faithfull F0393 Brick Bolster 4in with Grip

Manufactured for cutting bricks during building work.This chisel has a suitably hardened cutting edge, but should not be used on concrete containing r... More Info

£10.61 INC VAT

Faithfull F0402 Brick Bolster 3in

Manufactured for cutting bricks during building work.This chisel has a suitably hardened cutting edge, but should not be used on concrete containing r... More Info

£6.41 INC VAT

Faithfull F0402 Brick Bolster 3in - Walleted

Manufactured for cutting bricks during building work.This chisel has a suitably hardened cutting edge, but should not be used on concrete containing r... More Info

£7.74 INC VAT

Faithfull F0404 Brick Bolster 4in

Manufactured for cutting bricks during building work.This chisel has a suitably hardened cutting edge, but should not be used on concrete containing r... More Info

£7.99 INC VAT

Faithfull F0404 Brick Bolster 4in - Walleted

Manufactured for cutting bricks during building work.This chisel has a suitably hardened cutting edge, but should not be used on concrete containing r... More Info

£9.22 INC VAT

Faithfull F0411 Flooring Chisel 2.1/4in

Designed for cutting the tongue in laid tongued and grooved floorboarding in order to remove part of the board.Hardened and tempered cutting edge.NOT ... More Info

£5.32 INC VAT

Faithfull F0414G Flooring Chisel 2.1/4 with Grip

Designed for cutting the tongue in laid tongued and grooved floorboarding in order to remove part of the board.Fitted with a sturdy rubber safety grip... More Info

£7.94 INC VAT

Faithfull F0416 Fluted Plugging Chisel 230mm x 5mm

Designed to remove mortar from between bricks either prior to re-pointing or the removing of a brick.The cutting edge is wider than the blade to give ... More Info

£5.58 INC VAT

Faithfull F0418g Fluted Plugging Chisel with Grip 230mm x 5mm

Designed to remove mortar from between bricks either prior to re-pointing or the removing of a brick.The cutting edge is wider than the blade to give ... More Info

£10.02 INC VAT

Faithfull F0426 Dome Head Chasing Chisel 2in

For cutting channels for cables in cement, rendering, plaster, brick and breeze block.Special heat treated dome head with strong hardened blade.Not to... More Info

£9.14 INC VAT

Faithfull F0476 Scutch Comb Holder 8in x 1in

For detachable stone dressing combs which are used for preparation of surface prior to re-rendering.Size. 8in x 1in..... More Info

£8.44 INC VAT

Faithfull F0477 Scutch Comb Holder 8in x 1.1/2in

For detachable stone dressing combs which are used for preparation of surface prior to re-rendering.Size. 8 x 1.1/2in.... More Info

£9.33 INC VAT

Faithfull Flooring Chisel 2.1/4in - Pre Pack

Designed for cutting the tongue in laid tongued and grooved floorboarding in order to remove part of the board.Hardened and tempered cutting edge.NOT ... More Info

£6.07 INC VAT

Faithfull Fluted Plugging Chisel - Pre Pack

Designed to remove mortar from between bricks either prior to re-pointing or the removing of a brick.The cutting edge is wider than the blade to give ... More Info

£6.29 INC VAT

Faithfull Scutch Comb Holder 8in x 1in - Pre Pack

For detachable stone dressing combs which are used for preparation of surface prior to re-rendering.Size. 8in x 1in..... More Info

£9.69 INC VAT

Faithfull Scutch Combs (box 25) 1.1/2in

Fits into a scutch comb holder when preparing stone and masonry etc. The size of the scutch comb must be the same width as the combholder being used.S... More Info

£17.30 INC VAT

Faithfull Scutch Combs (box 25) 1in

Fits into a scutch comb holder when preparing stone and masonry etc. The size of the scutch comb must be the same width as the combholder being used.S... More Info

£13.35 INC VAT

Faithfull Scutch Combs (box 25) 2in

Fits into a scutch comb holder when preparing stone and masonry etc. The size of the scutch comb must be the same width as the combholder being used.S... More Info

£21.67 INC VAT

Faithfull Scutch Combs (pack 5) 1.1/2in

Fits into a scutch comb holder when preparing stone and masonry etc. The size of the scutch comb must be the same width as the combholder being used.S... More Info

£5.44 INC VAT

Faithfull Scutch Combs (pack 5) 1in

Fits into a scutch comb holder when preparing stone and masonry etc. The size of the scutch comb must be the same width as the combholder being used.S... More Info

£4.84 INC VAT

Faithfull Scutch Combs (pack 5) 2in

Fits into a scutch comb holder when preparing stone and masonry etc. The size of the scutch comb must be the same width as the combholder being used.S... More Info

£4.79 INC VAT

Footprint 1236 Brick Bolster 114mm (4.1/2in)

Footprint Brick Bolsters have a fully drop forged design for cutting bricks and other general building uses. Hardened and tempered blade to provide a ... More Info

£16.41 INC VAT

Footprint 1236 Brick Bolster 3in

A carbon steel, one piece drop forging. This bolster chisel not only incorporates an anti-mushroom head, but also a much strengthened neck. Manu... More Info

£11.98 INC VAT

Footprint 1860 Grooved Plugging Chisel

The Footprint Grooved Plugging Chisel is used to remove the mortar and cement from between brick and block work. Made from a single, fully forged piec... More Info

£9.25 INC VAT

Footprint Cold Chisel 250 x 25mm

This Footprint Cold Chisel is ideal for use on stone, masonry, brick work and other similar materials. It has a heavy-duty design and is made from a f... More Info

£9.70 INC VAT

Stanley Brick Bolster 4in x 8.1/2in 4-18-297

Quality chrome vanadium steel, increased strength and durability for all metalwork tasks from chipping and shaping wrought iron, cast iron, steel, bra... More Info

£12.98 INC VAT

Stanley Brick Punch 3/8in x 5.1/2in 4-18-236

Pin punch Quality chrome vanadium steel increased strength and durability for retained accuracy when marking out centre lines , hole locations and pil... More Info

£3.65 INC VAT

Stanley Cold Chisel 1/2in x 6in 4-18-287

Quality chrome vanadium steel, increased strength and durability for all metalwork tasks from chipping and shaping wrought iron, cast iron, steel, bra... More Info

£3.78 INC VAT

Stanley Cold Chisel 1in x 12in 4-18-291

Quality chrome vanadium steel, increased strength and durability for all metalwork tasks from chipping and shaping wrought iron, cast iron, steel, bra... More Info

£11.34 INC VAT

Stanley Cold Chisel 3/4in x 6.7/8in 4-18-289

Quality chrome vanadium steel, increased strength and durability for all metalwork tasks from chipping and shaping wrought iron, cast iron, steel, bra... More Info

£5.54 INC VAT

Stanley Cold Chisel 3/8in x 5.9/16in 4-18-286

Quality chrome vanadium steel, increased strength and durability for all metalwork tasks from chipping and shaping wrought iron, cast iron, steel, bra... More Info

£3.78 INC VAT

Stanley Cold Chisel 5/8in x 6.3/4in 4-18-288

Quality chrome vanadium steel, increased strength and durability for all metalwork tasks from chipping and shaping wrought iron, cast iron, steel, bra... More Info

£4.29 INC VAT

Stanley Cold Chisel 7/8in x 8in 4-18-290

Quality chrome vanadium steel, increased strength and durability for all metalwork tasks from chipping and shaping wrought iron, cast iron, steel, bra... More Info

£8.30 INC VAT

Stanley Cold Chisel Kit 3pce 4-18-298

For cutting , shaping wrought iron, cast iron, steel, brass, bronze, copper and aluminium. Cutting bolts, nuts and rivets. Type = Cold Chisel set 3pc ... More Info

£9.45 INC VAT

Stanley FatMax® Brick Set 3in x 8.1/2in With Guard 4-18-327

Forged from chrome vanadium steel for increased strength and durability. Blade holds its edge longer and therefore needs less sharpening.Less grinding... More Info

£16.38 INC VAT

Stanley FatMax® Brick Set 4in x 8-1/2in With Guard 4-18-328

Forged from chrome vanadium steel for increased strength and durability. Blade holds its edge longer and therefore needs less sharpening.Less grinding... More Info

£18.89 INC VAT

Stanley FatMax® Cold Chisel 1in x 12in With Guard 4-18-332

Forged from chrome vanadium steel for increased strength and durability. Blade holds its edge longer and therefore needs less sharpening.Less grinding... More Info

£17.00 INC VAT

Stanley FatMax® Concrete Chisel 3/4in x 12in With Guard 4-18-329

Forged from chrome vanadium steel for increased strength and durability. Blade holds its edge longer and therefore needs less sharpening.Less grinding... More Info

£16.38 INC VAT

Stanley FatMax® Electricians Chisel 2.1/4in x 10in C/W Guard 4-18-330

Forged from chrome vanadium steel for increased strength and durability. Blade holds its edge longer and therefore needs less sharpening.Less grinding... More Info

£16.38 INC VAT

Stanley FatMax® Floor Chisel 3in x 11in With Guard 4-18-331

Forged from chrome vanadium steel for increased strength and durability. Blade holds its edge longer and therefore needs less sharpening.Less grinding... More Info

£18.27 INC VAT

Stanley FatMax® Masons Chisel 1.3/4in x 8.1/2in With Guard 4-18-333

Forged from chrome vanadium steel for increased strength and durability. Blade holds its edge longer and therefore needs less sharpening.Less grinding... More Info

£13.84 INC VAT

Stanley Masons Chisel 1.3/4in x 8.1/2in 4-18-294

Quality chrome vanadium steel, increased strength and durability. Mason's chisels are used for cutting and splitting hard stone, brick and concrete. Q... More Info

£10.08 INC VAT

Stanley Punch & Chisel Set 12pce 4-18-299

Chisels for cutting , shaping wrought iron, cast iron, steel, brass, bronze, copper and aluminium. Cutting bolts, nuts and rivetsPunches for marking c... More Info

£31.51 INC VAT

Stanley Utility Chisel 1.1/4in x 12in 4-18-292

Quality chrome vanadium steel, increased strength and durability for all metalwork tasks from chipping and shaping wrought iron, cast iron, steel, bra... More Info

£8.94 INC VAT

All lines on our website are not always stocked in store. Please call before visiting the shop to check stock levels.

----------------

Opening Hours

Weekdays: 9am to 5pm

Saturdays: 9am to 12 noon

Sundays: Closed

----------------

For Safety the number of Customers at any one time is restricted.

If you have forgotten your mask we can serve you at the door.

----------------

Terms & Conditions

We Accept Visa, Mastercard,Maestro,Solo,Visa Electron and Detla.