|
Product Code: CNWW614
Please note this is an overweight product please ring for current carriage prices
The large table surface area on this machine is made up of the main table, a removable table at the rear and two side extensions. All are manufactured from extruded aluminium to ensure flatness. So that this saw will not take up valuable workshop space when not in use, the two side extension tables have a quick action folding mechanism which takes only seconds to put up or down. With the same outlook on compactness the floorstand is also a folding design which takes only seconds to assemble.
Greater cutting accuracy is obtained by using a belt drive system on the blade, the secondary effect is much quieter running than with the traditional geared type of saw. The 2hp motor gives a 3" cutting depth and the ripping fence goes out to 17" which is a big capacity for a saw under £200 !!
The inclusion of a FREE dust extraction kit allows dust to be collected from both the saw guard and below the table from a single 40mm connection.
Supplied with left and right folding extension tables, rear extension table, folding floorstand, mitre fence adjustable 45 degrees each way, dust extraction kit 40mm diameter outlet, 24 tooth TCT blade, cable and plug.
- Belt Drive for Quieter Running
- Folding Tables for Compact Storage
- Folding Floorstand for Easy Portability
- Quick Action Rip Fence
- Crosscut Fence Included
- FREE Dust Extraction Kit Included
- Supplied with TCT Blade
Specification: |
Table Size |
950mm x 1000mm |
Table Width with Extension Tables Folded |
440mm |
Maximum ripping width |
450mm |
Blade Tilt |
0 - 45 degrees |
Cutting Depth at 90 degrees |
75mm |
Cutting Depth at 45 degrees |
60mm |
Blade Diameter |
254mm |
Blade Bore |
30mm |
Table Height |
830mm |
Motor (carbon brush) |
1500w / 240v |
Dimensions (WxDxH) |
950mm x 1080mm x 1000mm |
Weight |
39kg |
Rating |
DIY |
Warranty Period |
1 Year |
|