|
Product Code: CNWW711
Please note this is an overweight product please ring for current carriage prices
A small yet incredibly tough bandsaw with a durable precision ground cast iron tilting table including a T-slot mitre fence channel. The quick release fence locks onto both front and rear of the table to provide a straight guide for ripping whilst the sliding mitre fence is adjustable for crosscutting at any angle. The blade guard can be adjusted one handed using a dial located at the rear of the machine. A strong feature on this machine is the easy access when setting the side guides and rear thrust bearing which control the blade during the cut. A durable powder coated paint finish will keep it looking good in your workshop for many years.
Supplied with rip fence, sliding crosscut mitre fence adjustable 60 degrees each way, 1/4" blade, NVR switch, 60mm diameter extraction outlet, cable and plug. The dust kit converts the outlet for use with a 100mm extractor system.
Specification: |
Maximum cutting depth |
80mm |
Throat width |
200mm |
Table size |
300mm x 270mm |
Number of Wheels |
2 |
Table tilt |
0-45 |
Cutting speed |
1400m/min |
Motor (induction) |
300W |
Blade length |
1400mm |
Blade widths |
3mm - 10mm (1/8" - 3/8") |
Dimensions (WxDxH) |
440mm x 400mm x 700mm |
Weight |
25Kg |
Rating |
DIY | |
Accessories |
|