Bostitch
  Home About Us Contact Us Help  
Search

Categories
Abrasives
Armorgard
Decorating
Drill Bits
Fixings
Footprint Tools
Garden Tools
Hand Tools
Hardware & Ironmongery
Holesaws
Home & Leisure
Power Tool Accessories
Power Tools
RIDGID TOOLS
Safety
Tool Storage
Trend Routing
Workwear
Full Product Index

Brands
Browse By Brand
Bostitch 33° Galvanised Wire Weld Ringshank Collated Nails 2.8 x 63mm Pack of 2 200

Discontinued - Please Enquire For Current Availability

Click For Bigger Image

Bostitch
Product Code: BOSWW8R63G12

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments.

33° Collation Angle.

Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tool lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm outstretched.

(Remember only tools fitted with sequential trip should be used when working up a ladder).

Galvanising or coating with zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.

1 x Box of 2,200 Bostitch 2.8 x 63mm 33° Wire Weld Ringshank Galvanised Collated Nails

Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher and the energy required to drive these nails into hard wood is very much greater.



All lines on our website are not always stocked in store. Please call before visiting the shop to check stock levels.

----------------

Opening Hours

Weekdays:  9am to 5pm

Saturdays:  9am to 12 noon

Sundays:  Closed

----------------

For Safety the number of Customers at any one time is restricted. 

If you have forgotten your mask we can serve you at the door.

----------------

Hitachi
Garryson
Priory
ZenithProfin
Einhell


  Terms & Conditions  
Powered By TABS For Tools We Accept Visa, Mastercard,Maestro,Solo,Visa Electron and Detla.  

© 2024 Wokingham Tools  
Friday 29th March 2024