|
Product Code: CNWW683
Please note this is an overweight product please ring for current carriage prices
3 Function Combination Machine; Circular Saw, Spindle Moulder & Sliding Carriage
With a cast iron table and heavy steel casing this superb combination machine offers the small workshop incredible versatility. A simple function selector switch starts and stops the machine.
Circular Saw; The Tungsten sawblade will give a cut of more than 2" at 90 degrees. The large table surface area enables rip cuts of up to 16" to be made using the fence. There is an accurate sliding mitre gauge for small cross cut pieces and a full sliding carriage for crosscutting panels up to 24". Dust is collected from above the blade and below the blade from a single collection point of 100mm diameter.
Spindle Moulder; To use the spindle moulder the saw guard is removed and the saw blade lowered below the surface of the table. The moulder fence has a heavy cast iron body with large wooden fences. The fences are independently adjustable to close right up on the cutter and to step out the back fence when a complete face is being removed. A hinged top allows the spindle to be quickly accessed for tooling changes. Top and front spring pressures ensure complete safety and firm placement of the work piece at all times. Dust and chips are collected via a 100mm outlet at the back of the fence.
Sliding Carriage; The sliding carriage consists of a cast iron table and bearing guides running along an aluminium extrusion. The fence can be used either in front of the work piece or behind it, the former giving a crosscut capacity of 700mm. The fence can be angled accurately between 90 and 45 degrees with a useful stop to quickly return to 90 degrees again. A hold down clamp and a length stop complete the equipment.
Supplied with 24 tooth TCT sawblade, Saw guard extraction hose, 100mm diameter dust extraction connector, mitre guide, push stick, cable & plug.
This machine can be further expanded by adding our W583 10" x 7" Planer Thicknesser. The two units are joined together (The joining kit is included with the W683) to become a 5 function universal machine all controlled from a central switching point. For further details see Universals or W600.
- Extremely Durable Cast Iron Table
- Simple Operation with 2 Independent Motors
- Accurate Table Saw with 16" Ripping & 24" Crosscut
- Tilt Arbour Sawblade
- Spindle Moulder with Sturdy Tennoning Carriage
- Full Dust Extraction Kit Included
- Combines with W583 Planer Thicknesser for 5 Functions
Specification: |
Table Size |
410mm x 940mm |
Table Saw Motor (Induction) |
1100w |
Cutting Depth at 90/45 degrees |
60mm / 42mm |
Blade Diameter x Bore |
200mm x 30mm |
Blade Tilt |
90 - 45 degrees |
Sliding Table Stroke |
750mm |
Sliding Table Size |
400mm 250mm |
Spindle Moulder Motor (Induction) |
1500w |
Spindle Diameter x Height |
30mm x 83mm |
Maximum Tooling Diameter |
140mm |
Spindle Stroke |
80mm |
Spindle Speed |
6500rpm |
Dimensions (WxDxH) |
1170mm x 1130mm x 1160mm |
Weight |
140kg |
Rating |
Light Trade |
|