|
Product Code: CNWW715
Please note this is an overweight product please ring for current carriage prices
A medium sized bandsaw with a durable precision ground cast iron tilting table with a stop for returning to 90 degrees after a bevel cut and two mitre fence slots. The quick release fence locks onto both front and rear of the table to provide a rigid straight guide for ripping whilst the sliding mitre fence is adjustable for crosscutting at any angle. The new rack & pinion blade guard design can be adjusted single handed using a dial on the side of the machine and is fitted with a scale to set the cutting height. Two side guide bearings and a rear thrust bearing on the end of the guard, control the blade and keep it true. Finished off with a durable powder coated paint.
Supplied with rip fence, mitre fence adjustable 60 degrees each way, 3/8" blade, NVR switch, 60mm diameter extraction outlet, cable and plug.
.
· 100mm Cutting Depth Capacity
· 250mm Throat Capacity
· Retractable Blade Guard
· Cast Iron Tilting Table
· Powered by a Quiet Induction Motor
· Quick Locking Rip Fence Included
· Sliding Mitre Fence Included
Optional Floorstand Available
Specification:
|
Maximum cutting depth
|
100mm
|
Throat width
|
250mm
|
Table size
|
340mm x 335mm
|
Table height (on optional floorstand)
|
900mm
|
Table tilt
|
0-45
|
Cutting speed
|
800m/min
|
Motor (induction)
|
375W
|
Blade length
|
1712mm
|
Blade widths
|
6mm - 12mm (1/4" - 1/2")
|
Dimensions (WxDxH) [on stand]
|
400mm x 520mm x 840mm [1540mm]
|
Weight
|
30Kg
|
Rating
|
DIY
|
|
Accessories |
|