Bostitch
  Home About Us Contact Us Help  
Search

Categories
Abrasives
Armorgard
Decorating
Drill Bits
Fixings
Footprint Tools
Garden Tools
Hand Tools
Hardware & Ironmongery
Holesaws
Home & Leisure
Power Tool Accessories
Power Tools
RIDGID TOOLS
Safety
Tool Storage
Trend Routing
Workwear
Full Product Index

Brands
Browse By Brand
Bostitch N230R55 55mm Bright Ring Coil Nails Pack of 9900

Discontinued - Please Enquire For Current Availability

Click For Bigger Image

Bostitch
Product Code: BOSN230R55

Designed for high volume operation, coils contain large quantities of nails meaning that reloading down time can be kept to a minimum. You will find them in the pallet and crate, fencing, garden furniture and the construction industries.

All Coil Nails are Round Head nails.

Typically:

Coils of nails with diameters from 2.0mm to 2.2 mm contain 350 nails.

Coils of nails with diameters from 2.5mm to 3.1 mm. Contain 225 nails.

Roofing nail coils contain 120 nails, due to the extra large diameter of the head.

15° Collation angle

Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them.

Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater.

Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish.

Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.

For use with

N57C-1CE heavy-duty Coil Nailer

N58C-1-E Coil Nailer

N58C-1-E Coil Nailer

N66C-2-E Coil Nailer

2.3mm Ring Coil Nails

Nail Finish : Bright
Nail Length : 55mm
Qty. Box of 9900



All lines on our website are not always stocked in store. Please call before visiting the shop to check stock levels.

----------------

Opening Hours

Weekdays:  9am to 5pm

Saturdays:  9am to 12 noon

Sundays:  Closed

----------------

For Safety the number of Customers at any one time is restricted. 

If you have forgotten your mask we can serve you at the door.

----------------

Scan
Kunys
Steinel
Stanley
Coleman


  Terms & Conditions  
Powered By TABS For Tools We Accept Visa, Mastercard,Maestro,Solo,Visa Electron and Detla.  

© 2024 Wokingham Tools  
Thursday 28th March 2024