|
Product Code: CNWW730
Please note this is an overweight product please ring for current carriage prices
A NEW woodworking bandsaw for 2011.
- Powerful 1100w Induction Motor
- Quick Release Blade Tensioner
- Handle to Adjust Table Angle
- Big Cast Iron Table
- Heavy Duty Bearing Blade Guides
- Quick Lock Rip Fence
- Crosscut Fence Included
- Enclosed Floorstand Included
The latest addition to the Charnwood bandsaw range has a 14'' wide capacity with a 9'' cutting depth. A large cast iron tilting table with a 90 degree return stop and powder coat paint finish ensure this bandsaw is tough enough for any workshop. The pressed steel frame ensures the rigidity required for high blade tension and accurate ripping. The blade is kept true and straight by a set of 3 large bearing guides mounted to the blade guard and another set of 3 further bearing guides mounted below the table. The rise & fall of the blade guard can be adjusted and locked in position with one hand. A simple adjustment of the drive belt lowers the blade speed for anyone wishing to cut metals, plastics and very hard woods.
Supplied with cabinet floorstand, rip fence, a cast sliding mitre guide with fence adjustable 45 degrees each way, 1/2" width blade, NVR switch, 100mm diameter extraction outlet, cable and plug
Specification: |
Maximum cutting depth |
230mm |
Throat depth |
340mm |
Table size |
550mm x 400mm |
Table height |
1000mm |
Table tilt |
90-45 degrees |
Cutting speed |
370 & 800m/min |
Motor (induction) |
1100w (1.5hp) |
Blade length |
2560mm |
Blade widths |
6mm-19mm (1/4"-3/4") |
Dimension (WxDxH) |
800mm x 570mm x 1740mm |
Weight |
92Kg |
Rating |
Trade | |
Accessories |
|