The Polyvine Stone & Brick Protector is a high performance water-based masonry protector and water repellent. It resists grease, oil, acids, alkaline and salts by forming a moisture barrier that seals off the surface. Dries to a dead flat finish, which retains the natural look of the substrate. Protection of the surface begins immediately after application and is complete in approximately 24 hours.

Do not use in temperatures below 5°c/40°f or in very high humidity. Stone and brick protector should be used as supplied, without dilution, by brush, spray or roller. Mix well before use, for general applications on masonry, brickwork and stone, a single application will be sufficient.

Ideal for: stone, plaster, brick, slate, flagstones, fireplaces, exposed stone walls, brick walls and stone window ledges.

Drying Time: 15 minutes to 1 hour (Depending on temperature).
Coverage: 15-20m² per litre (Depending on the porosity of the material).

PolyvineStone & Brick Protectoer Dead Flat Finish 4 Litre