Trend Combi640h Combi640h Insert Worktop Jig COMBI640H from Wokingham Tools

Product Code: COMBI640H
Hire version worktop jig for 420mm to 640mm width worktops. Made from a hard wearing solid laminate 16mm thick with replaceable 12mm insert.
Cuts up to 40mm thick work tops with or without anti drip post formed edge.
Out-of-square joints can be accommodated.
Two alloy location bushes & width setting stop.
Cuts out of square joints (max. 3 degree).
Jig requires:
A portable plunge router with 12.7mm (1/2 inch) shank capacity and minimum 1300 watts.
A template guide bush with 30mm outside diameter Ref. GB30
A TCT router cutter with 12.7mm (1/2 inch) diameter and 50mm (2 inch) cut length.
Two 100mm (4 inch) throat clamps.

Dimensions:
Length=787 mm
Width=362 mm
Thickness=16 mm
Female cut material width loss (inset)=23 mm
Bolt recesses=2
Bolt centres=300 mm
Out of square max.=3 degrees
Jig Requirements
Guide bush=30 mm
Plunge router=1/2-inch (min. 1300 watts)
Cutter=12.7 mm x 50 mm cut
Clamps=Two

Last Viewed