The DEWALT DCN694 XR Metal Connector Nailer is a cordless gas free solution for working with timber frame metal connector brackets. Powered by a powerful brushless motor and DEWALT 18V XR battery technology. Rapid Cycle Sequential mode offers all of the speed of 'bump' mode, for use in areas where only Sequential tools can be used. Its two speeds allows for firing all lengths of nails.

Its versatile 30 - 34 degree magazine angle will accept most clipped head, and off centre round head paper tape or wire weld collated framing nails. Depths can be easily adjusted using the thumb wheel depth adjuster. The ergonomic tool design allows the nailer to fit easily between a 400mm centre stud. With increased visibility and durability along with protection for work-surfaces from the non-mar contact-trip. The hole alignment pin finds the hole quickly and positions the tool securely to ensure you hit the hole every time.

Tool free stall/jam clearance minimises user down time. Dry fire lockout also ensures the tool is protected from firing without nails in the magazine. The user can engage contact trip lock-off and prevent accidental discharge of fastener.

Supplied with a reversable belt/rafter hook for increased portability and versatility on the job-site.

Comes as a Bare Unit, NO battery or charger supplied.

Specifications:

Nail Diameter: 3.4-4mm.
Nail length: 35mm.
Magazine Capacity: 27 nails.
Weight: 3.6kg.