Discontinued - Please Enquire For Current Availability
|
PCD sawblade for use in 160mm plunge saws for rough cutting Gemstone worktop, wood-based material, plastic, cement fibre board, tool-wearing material eg laminate and solid wood.
For use on professional portable circular saws.
Eight tooth high-quality industrial polycrystalline diamond cutting tips.
10 degree top angle with negative 5 degree hook.
For roughing cut leaving 5mm overhang for router trimming.
Gemstone worktop is made of 85% recycled material including glass and shell, the solid upper surface is extremely abrasive and requires diamond tools to cut it. Gemstone worktop has 6mm solid material bonded to a 28mm high performance chipboard core.
For 5mm overhand rough cut set circular saw for first depth of cut 3-4mm plunged in to the edge of the front side of the worktop, second cut at 10mm depth, and 40mm for final cut.
Final trimming of 5mm overhang should be made with a router, using of a PCD router cutter ref. PCD/GEM01X1/2.
Not for non-ferrous material, glass or stone.
Dimensions:
D=6 1/4 inches
D=160 mm
Bore=20 mm
Kerf=2.4 mm
Plate thick=1.6 mm
No. of Teeth=8
Tooth form=Flat
Hook=-5 degrees
Quick Selector No.=7.1
Type=Gemstone
Cut Finish=Roughing
Suitable for
Festool TS55
Diameter Imperial: 6 1/4
Diameter Metric: 160
|
;)
