|
Product Code: SNAP/BH/M
Magnetic holder for 1/4-inch hex 25mm insert bits.
Micro diameter body.
Small 10.8mm diameter to allow access into tighter spaces.
Pull back ring to release bits, spring-loaded release of bit.
Tested to 50 Nm torque.
Extra strong magnet N50 (Gauss 3900-4000) to minimise bit loss due to the bits sticking to the screw.
Stainless steel housing.
Due to its small diameter the bit holder should not be used on long screws that require a high torque.
Dimensions:
D=10.8 mm
For hex bits=1/4-inch
Overall length=66 mm
Shank Diameter=1/4 inch hex
Gauss measurement=3900-4000
Not for use with long screws requiring high torque.
Shank Diameter: 1/4 hex
Diameter Metric: 11
Overall Length Metric: 66
|
;)
