Discontinued - Please Enquire For Current Availability
|
Product Code: SNAP/PC/AT
This set incorporates two drill countersinks and matching tube type plug cutters.
Plugs cutters are made from Tool Steel and allow for longer plugs to be drilled.
Plugs are parallel sided.
Use on timber to drill a countersunk hole for a screw which is then plugged uses a plug/pellet made using the plug cutter.
Recommended that plug cutters are used in a pillar drill.
Dimensions:
No.8 drill/countersink
D=3/8 inch
D=9.5 mm
D2=7/64 inch
D2=2.75 mm
No.10 drill/countersink
D=1/2 inch
D=12.7 mm
D2=1/8 inch
D2=3.2 mm
Shank Diameter=1/4 inch hex
Screw size=No.8
Screw size=No.10
Shank Diameter: 1/4 hex
Diameter Metric: 9.5/12.7
Diameter 2 Metric: 2.75/3.2
|
