
Home	About Us	Contact Us	Help

Sealey

NEEDLE SEAT

... More Info

£1.29 INC VAT

NEEDLE SEAT

... More Info

£1.61 INC VAT

NEEDLE SPRING

... More Info

£0.87 INC VAT

NEW SIPHON NOZZLE

... More Info

£51.70 INC VAT

Next Generation All-In-One Multi-Service Diagnostic Tool

Expert Quality, easy to use, yet sophisticated tool for the next generation of vehicle servicing, including oil service reset, electronic parking brak... More Info

£249.52 INC VAT

Nicholson 2 Round Edge Blunt Millsaw Second Cut File 8in

This Millsaw File is of rectangular section and used primarily for sharpening mill or circular saws.Single cut teeth on both sides and edges.Has two r... More Info

£7.78 INC VAT

Nicholson 610 Round Chainsaw File 1/8in

Single Cut Teeth for sharpening round-hooded chain saw teeth.Safe point and efficient tooth design.Length. 6in.Diameter. 1/8in.... More Info

£2.00 INC VAT

Nicholson 80974 Hacksaw 4 In 1 Pro Series

Pro 4-in-1 Series Hacksaw FrameStandard 90 degree for general use 45 degree angle for flush cuts Low profile position for tight spaces Jab saw co... More Info

£25.71 INC VAT

Nicholson 84 Round Chainsaw File 1/4in

Single Cut Teeth for sharpening round-hooded chain saw teeth.Safe point and efficient tooth design.Length. 8in.Diameter. 1/4in.... More Info

£2.06 INC VAT

Nicholson Double Ender Saw File 6in

For sharpening saws with 60Âº angle.No tang but tapered at each end and supplied with wooden handle.Single cut teeth.Length 6in.Side 13/64in.... More Info

£8.33 INC VAT

Nicholson Double Ender Saw File 7in

For sharpening saws with 60Âº angle.No tang but tapered at each end and supplied with wooden handle.Single cut teeth.Length. 7in.Side. 7/32in.... More Info

£7.86 INC VAT

Nicholson Double Ender Saw File 8in

For sharpening saws with 60Âº angle.No tang but tapered at each end and supplied with plastic handle.Single cut teeth.Length 8in.Side 9/32in... More Info

£7.44 INC VAT

Nicholson Extra Slim Taper Saw File 4in

A single ended triangular saw file, single cut. For Dovetail and other fine toothed sawsApproximate Size. (excluding tang) 100 x 4.5mm.Size: 4in x 3.... More Info

£4.13 INC VAT

Nicholson Extra Slim Taper Saw File 6in

A single ended triangular saw file, single cut. For Dovetail and other fine toothed saws.Approximate Size. (excluding tang) 150 x 6.5mm.Size: 6in x 9... More Info

£4.68 INC VAT

Nicholson Farmers Own File 10in

A general purpose file suited to agricultural use.It is self handled, flat with parallel sides.Teeth are single cut and the file has two safe edges.Th... More Info

£19.86 INC VAT

Nicholson Farmers Own File 8in

A general purpose file suited to agricultural use.It is self handled, flat with parallel sides.Teeth are single cut and the file has two safe edges.Th... More Info

£10.41 INC VAT

Nicholson Flat Bastard File 10in

For general work on iron and steel slightly tapered in width and thickness.Double cut on both sides, and single cut on both edges.Size.10in.Type. Bast... More Info

£10.94 INC VAT

Nicholson Flat Bastard File 12in

For general work on iron and steel slightly tapered in width and thickness.Double cut on both sides, and single cut on both edges.Size.12in.Type. Bast... More Info

£13.24 INC VAT

Nicholson Flat Bastard File 6in

For general work on iron and steel slightly tapered in width and thickness.Double cut on both sides, and single cut on both edges.Size.6in.Type. Basta... More Info

£5.94 INC VAT

Nicholson Flat Bastard File 8in

For general work on iron and steel slightly tapered in width and thickness.Double cut on both sides, and single cut on both edges.Size.8in.Type. Basta... More Info

£6.74 INC VAT

Nicholson Flat Second Cut File 10in

For general work on iron and steel slightly tapered in width and thickness.Double cut on both sides, and single cut on both edges.Size.10in.Type. Seco... More Info

£10.02 INC VAT

Nicholson Flat Second Cut File 12in

For general work on iron and steel slightly tapered in width and thickness.Double cut on both sides, and single cut on both edges.Size.12in.Type. Seco... More Info

£15.13 INC VAT

Nicholson Flat Second Cut File 14in

For general work on iron and steel slightly tapered in width and thickness.Double cut on both sides, and single cut on both edges.Size.14in.Type. Seco... More Info

£21.90 INC VAT

Nicholson Flat Second Cut File 6in

For general work on iron and steel slightly tapered in width and thickness.Double cut on both sides, and single cut on both edges.Size.6in.Type. Secon... More Info

£6.02 INC VAT

Nicholson Flat Second Cut File 8in

For general work on iron and steel slightly tapered in width and thickness.Double cut on both sides, and single cut on both edges.Size.8in.Type. Secon... More Info

£7.22 INC VAT

Nicholson Flat Smooth Cut File 10in

For general work on iron and steel.Slightly tapered in width and thickness.Double cut on both sides, and single cut on both edges.Size.10in.Type. Smoo... More Info

£10.33 INC VAT