Slotting & Grooving, Router Cutters, Trend Routing on Wokingham Tools


Home	About Us	Contact Us	Help

Slotting & Grooving

Trend Routing > Router Cutters > Slotting & Grooving

Returned 100 Results

TREND QUADX1/2TC QUAD GROOVER SET 1/2

This versatile 1/2 inch shank groover set offers grooving widths of 3.2mm, 4.0mm, 4.8mm and 6.3mm. It is infiniteley variable from 6.6mm to 18mm in 0... More Info

£109.62 INC VAT

TREND 34/5TC SLOTTER 9.5MM KERF X50MM M12X1 BORE

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Dimensions: D=50 mm Bo... More Info

£99.86 INC VAT

TREND 34/14TC SLOTTER 11MM KERF X50MM M12X1 BORE

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Dimensions: D=50 mm Bo... More Info

£91.04 INC VAT

TREND 34/7TC SLOTTER 7MM KERF X50MM M12X1 BORE

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Dimensions: D=50 mm Bo... More Info

£88.61 INC VAT

TREND 34/40TC SLOTTER 10MM KERF X 50MM 12MM BORE

These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing... More Info

£86.19 INC VAT

TREND 34/13TC SLOTTER 8MM KERF X50MM M12X1 BORE

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Dimensions: D=50 mm Bo... More Info

£83.90 INC VAT

TREND 39/6TC SLOTTER 2MM KERF X 86MM 12MM BORE

These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing... More Info

£83.16 INC VAT

TREND 34/3TC SLOTTER 8MM KERF X 50MM 12MM BORE

These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing... More Info

£82.99 INC VAT

TREND 34/12TC SLOTTER 6MM KERF X50MM M12X1 BORE

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Dimensions: D=50 mm Bo... More Info

£81.48 INC VAT

TREND 34/110TC SLOTTER 5MM KERF X50MM M12X1 BORE

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Dimensions: D=50 mm Bo... More Info

£81.48 INC VAT

TREND 39/9TC SLOTTER 2.5MM KERF X 100 12MM BORE

These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing... More Info

£80.75 INC VAT

TREND 34/9TC SLOTTER 2.5MM KERFX50MM M12X1 BORE

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Dimensions: D=50 mm Bo... More Info

£79.81 INC VAT

TREND 34/10TC SLOTTER 3MM KERF X50MM M12X1 BORE

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Dimensions: D=50 mm Bo... More Info

£79.81 INC VAT

TREND 27/59X1/2TC VARIABLE GROOVER 5MM TO 9MM X 50MM

To adjust the groove width these tools can be re-assembled with the supplied shims and spacers inserted between the groovers, giving a 0.1mm incremen... More Info

£79.15 INC VAT

TREND 34/11TC SLOTTER 4MM KERF X50MM M12X1 BORE

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Dimensions: D=50 mm Bo... More Info

£79.06 INC VAT

TREND 34/03TC SLOTTER 2MM KERF X 50MM M12 X1 BORE

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Dimensions: D=50 mm Bo... More Info

£79.06 INC VAT

TREND 34/2TC SLOTTER 6MM KERF X 50MM 12MM BORE

These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing... More Info

£75.85 INC VAT

$TREND 35/4X1/2TC \\\$

TREND 35/4X1/2TC \'T\' SLOTTER 35MM DIA X 9.5MM CUT

A range of heavy duty 'T' slot cutters for clamping and hanging applications. Relief cut required. Dimensions: D=35 mm D2=12.7 mm Cut length=9.... More Info

£73.05 INC VAT

TREND 34/15TC SLOTTER 10MM KERF X40MM M12X1 BORE

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Dimensions: D=40 mm Bore=M... More Info

£73.05 INC VAT

TREND 27/35X1/2TC VARIABLE GROOVER 3MM TO 5MM X 50MM

To adjust the groove width these tools can be re-assembled with the supplied shims and spacers inserted between the groovers, giving a 0.1mm incremen... More Info

£73.05 INC VAT

TREND 34/1TC SLOTTER 4MM KERF X 50MM 12MM BORE

These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing... More Info

£72.66 INC VAT

TREND C192X1/2TC OFFSET TONGUE AND GROOVER

A reversible finger jointer, to increase the gluing area for edge to edge joints. Dimensions: D=40.0 mm D2=31 mm Cut length=32 mm Shank Diamete... More Info

£71.88 INC VAT

TREND 34/16TC SLOTTER 15MM KERF X40MM M12X1 BORE

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Dimensions: D=40 mm C=15 m... More Info

£71.28 INC VAT

TREND 34/04TC SLOTTER 5MM KERF X 50MM 12MM BORE

These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing... More Info

£68.09 INC VAT

TREND 87/01X1/2TC OFF SET TONGUE/GROOVER 47.5MM DIA

A heavy duty reversible finger jointer, to increase the gluing area for edge to edge joints. Dimensions: D=47.5 mm D2=37 mm C=30 mm Shank Diame... More Info

£66.10 INC VAT

TREND 34/01TC SLOTTER 4MM KERF X 41.25 DIA 1/4 ID

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. Dimensions: D=40 mm Kerf=4.0 mm No. of Teet... More Info

£65.02 INC VAT

$TREND 35/3X3/8TC \\\$

TREND 35/3X3/8TC \'T\' SLOTTER 28MM DIA X 8MM CUT

A range of heavy duty 'T' slot cutters for clamping and hanging applications. Relief cut required. Dimensions: D=28 mm D2=9.5 mm Cut length=8 m... More Info

£60.87 INC VAT

$TREND 35/1X1/4TC T\\\$

TREND 35/1X1/4TC T\' SLOTTER 12MM DIA X 10MM CUT

Slots for concealing electric cables etc. A 6mm slot must be cut first to allow for the cutter neck. Care must be taken to avoid breakage. Di... More Info

£60.87 INC VAT

$TREND 35/10X3/8TC \\\$

TREND 35/10X3/8TC \'T\' SLOTTER 28MM DIA X 4MM CUT

A range of heavy duty 'T' slot cutters for clamping and hanging applications. MEC mechanical feed only. Dimensions: D=28 mm D2=11.2 mm Cut length=4 m... More Info

£60.87 INC VAT

TREND 34/41TC SLOTTER 10MM KERFX 41.27MM 1/4 BORE

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. Dimensions: D=41.3 mm Kerf=10 mm No. of Tee... More Info

£59.14 INC VAT

TREND SP-34/74TC GROOVER 10MM X 41MM DIA X 8MM BORE

Replacement 10mm groover for the 337X1/2TC. Dimensions: D=41.0 mm Kerf=10 mm Grade: TCT Diameter Metric: 41.0... More Info

£58.31 INC VAT

TREND 35/20X1/2TC BALL GROOVER 12.7MM DIA

Ideal for hiding pipes and cables. Part of curve can be used for producing decorative edges. An initial slot is required before using the ball gro... More Info

£57.44 INC VAT

TREND 34/17TC SLOTTER 20MM KERF X40MM M12X1 BORE

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Dimensions: D=40 mm Bore=M... More Info

£54.57 INC VAT

TREND 34/220TC GROOVER R3MM X 36MM DIA X 1/4 ID

Allows decorative cuts in panels and frames to disguise glue lines. Dimensions: D=36 mm C=6 mm R1=3 mm Bore=1/4 mm Grade: TCT Diamete... More Info

£54.37 INC VAT

TREND 34/8TC SLOTTER 7MM KERFX 41.27MM 1/4 BORE

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. Dimensions: D=41.3 mm Kerf=7.0 mm No. of Te... More Info

£54.29 INC VAT

TREND 34/33TC SLOTTER 8MM KERFX 41.27MM 1/4 BORE

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. Dimensions: D=41.27 mm Kerf=8.0 mm No. of T... More Info

£54.29 INC VAT

TREND 35/22X1/2TC BALL GROOVER 32MM DIA

Ideal for hiding pipes and cables. Part of curve can be used for producing decorative edges. An initial slot is required before using the ball gro... More Info

£52.98 INC VAT

TREND 34/4TC SLOTTER 10MM KERF X 40MM 12MM BORE

These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing... More Info

£52.14 INC VAT

TREND C213X1/2TC WEATHERSEAL GROOVER 3 X 7X 36MM DIA

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is Teflon cutted to reduce resin build up. ... More Info

£50.33 INC VAT

TREND C212X1/2TC WEATHERSEAL GROOVER 2.8X7X 36MM DIA

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is Teflon cutted to reduce resin build up. ... More Info

£50.33 INC VAT

TREND C211X1/2TC WEATHERSEAL GROOVER 2.5X7X 36MM DIA

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is Teflon cutted to reduce resin build up. ... More Info

£50.33 INC VAT

TREND C210X1/2TC WEATHERSEAL GROOVER 2X 7 X 36MM DIA

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is Teflon cutted to reduce resin build up. ... More Info

£50.33 INC VAT

TREND C158X8MMTC TONGUE & GROOVER SET 41MM DIA

A one piece set. Parts are inter-changed on the arbor to alter the set-up. For use with router table only. Dimensions: D=41 mm Cut length=6.35 ... More Info

£50.33 INC VAT

TREND C158X1/4TC TONGUE & GROOVER SET 41MM DIA

A one piece set. Parts are inter-changed on the arbor to alter the set-up. For use with router table only. Dimensions: D=41 mm Cut length=6.35 ... More Info

£50.33 INC VAT

TREND C158X1/2TC TONGUE & GROOVER SET 41MM DIA

A one piece set. Parts are inter-changed on the arbor to alter the set-up. For use with router table only. Dimensions: D=41 mm Cut length=6.3... More Info

£50.33 INC VAT

TREND 35/21X1/2TC BALL GROOVER 25.4MM DIA

Ideal for hiding pipes and cables. Part of curve can be used for producing decorative edges. An initial slot is required before using the ball gro... More Info

£48.56 INC VAT

TREND 34/20TC SLOTTER 6MM KERF X 41.27MM 1/4 BORE

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. Dimensions: D=41.27 mm Kerf=6.0 mm No. of T... More Info

£45.60 INC VAT

$TREND 35/11X3/8TC \\\$

TREND 35/11X3/8TC \'T\' SLOTTER 40.8MM DIA X 4MM CUT

A range of heavy duty 'T' slot cutters for clamping and hanging applications. MEC mechanical feed only. Dimensions: D=40.8 mm D2=9.7 mm Cut length=4 ... More Info

£45.46 INC VAT

TREND 34/22TC SLOTTER 6MM KERF X 40MM 12MM BORE

These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing... More Info

£44.01 INC VAT

$TREND 35/2X1/4TC \\\$

TREND 35/2X1/4TC \'T\' SLOTTER 12MM DIA X 12MM CUT

Slots for concealing electric cables etc. A 6mm slot must be cut first to allow for the cutter neck. Care must be taken to avoid breakage. Di... More Info

£42.85 INC VAT

TREND 35/0X1/4TC KEYHOLE SLOTTER 9.5MM DIA

A keyhole recess for picture hanging flush to the wall. Ref. 35/0 - No.8 & No.10 screw heads. Ref. 35/01 - No.10 & No.12 screw heads. Not suitable ... More Info

£41.51 INC VAT

TREND SP-C208C GROOVER 10MM KERF X40MM X M12

Spare threaded groover to suit the C208X1/2TC intumescent strip cutter Dimensions: D=40 mm Kerf=10 mm Grade: TCT Diameter Metric: 40... More Info

£41.51 INC VAT

TREND SP-338C GROOVER CUTTER 6.0MM X 47MM DIA

Replacement 47mm groover for the 338X1/2TC. Dimensions: D=47.0 mm Kerf=6 mm Grade: TCT Diameter Metric: 47.0... More Info

£39.97 INC VAT

TREND 34/210TC GROOVER 60 DEG X 36MM DIA X 1/4 ID

Allows decorative cuts in panels and frames to disguise glue lines. Dimensions: D=36 mm A=60 degrees Bore=1/4 mm Kerf=6 mm Grade: TCT D... More Info

£39.42 INC VAT

TREND SL/K SLOTTER 5MM KERF X 40 DIA 1/4 BORE

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. Dimensions: D=40 mm Kerf=5.0 mm No. of Teet... More Info

£39.22 INC VAT

TREND SL/H SLOTTER 5.5MM KERF X36 DIA 1/4 BORE

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. Dimensions: D=36 mm Kerf=5.5 mm No. of Teet... More Info

£39.22 INC VAT

TREND SP-C221C GROOVER 15MM KERF X 40MM X 12MM ID

Replacement slotter for the C221X1/2TC intumescent cutter. Dimensions: D=40 mm Kerf=15 mm Grade: TCT Diameter Metric: 40... More Info

£39.22 INC VAT

TREND SL/G SLOTTER 4MM KERF X 36 DIA 1/4 BORE

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. Dimensions: D=36 mm Kerf=4.0 mm No. of Teet... More Info

£36.02 INC VAT

TREND SL/F SLOTTER 2.5MM KERF X50 DIA 1/4 BORE

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. Dimensions: D=50 mm Kerf=2.5 mm No. of Teet... More Info

£36.02 INC VAT

TREND SL/GG SLOTTER 4MM X 40MM X 1/4 BORE

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. Dimensions: D=40 mm Kerf=4.0 mm No. of Teet... More Info

£34.35 INC VAT

TREND SP-339A GROOVER CUTTER 4MM X 47MM DIA

Replacement 47mm groover for the 339X1/2TC. Dimensions: D=47.0 mm Kerf=4 mm Grade: TCT Diameter Metric: 47.0... More Info

£32.81 INC VAT

TREND SL/E SLOTTER 2MM KERF X40MM DIA 1/4 BORE

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. Dimensions: D=40 mm Kerf=2.0 mm No. of Teet... More Info

£31.93 INC VAT

TREND SL/D SLOTTER 3MM KERF X36 DIA 1/4 BORE

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. Dimensions: D=36 mm Kerf=3.0 mm No. of Teeth=2 ... More Info

£31.93 INC VAT

TREND SL/C SLOTTER 2.5MM KERF X36 DIA 1/4 BORE

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. Dimensions: D=36 mm Kerf=2.5 mm No. of Teet... More Info

£31.93 INC VAT

TREND SL/B SLOTTER 2MM KERF X36MM DIA 1/4 BORE

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. Dimensions: D=36 mm Kerf=2.0 mm No. of Teet... More Info

£31.93 INC VAT

TREND SL/A SLOTTER 1.5MM KERFX36MM X 1/4 BORE

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. Dimensions: D=36 mm Kerf=1.5 mm No. of Teet... More Info

£31.93 INC VAT

TREND 33/1X1/2 ARBOR FOR 12MM BORE GROOVER 85MM OL

Heavy duty arbor with spacers for 12mm bore slotters with or without bearings. Dimensions: Overall length=83 mm Spindle Length=45mm Threaded par... More Info

£31.93 INC VAT

TREND 34/200TC GROOVER 45 DEG X 36MM DIA X 1/4 ID

Allows decorative cuts in panels and frames to disguise glue lines. Dimensions: D=36 mm A=45 degrees Bore=1/4 mm Kerf=6 mm Grade: TCT D... More Info

£31.53 INC VAT

TREND SP-338B GROOVER CUTTER 34MM DIA X 8MM BORE

Replacement 34mm groover for the 338X1/2TC. Dimensions: D=34 mm Kerf=6 mm Grade: TCT Diameter Metric: 34... More Info

£31.29 INC VAT

TREND SP-27/35A SPARE TOP GROOVER 3MM FOR 27/35

Spare top groover for the 27/35X1/2TC. Dimensions: Kerf=3 mm ... More Info

£31.09 INC VAT

TREND SL/DD SLOTTER 3MM KERF X 40 DIA 1/4 BORE

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. Dimensions: D=40 mm Kerf=3.0 mm No. of Teet... More Info

£30.40 INC VAT

TREND SL/CC SLOTTER 2.5MM KERF X40 DIA 1/4 BORE

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. Dimensions: D=40 mm Kerf=2.5 mm No. of Teet... More Info

£30.40 INC VAT

TREND SL/AA SLOTTER 1.5MM KERF X 40MM 1/4 BORE

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. Dimensions: D=40 mm Kerf=1.5 mm No. of Teet... More Info

£30.40 INC VAT

TREND SP-34/73ATC GROOVER FOR PSC/106 & 107 46X6.35

Replacement groover for the PSC/106X1/2TC & PSC/107X1/2TC. Dimensions: D=46 mm Cut length=6.3 mm Grade: TCT Diameter Metric: 46 Cut Length Metric... More Info

£29.08 INC VAT

TREND 33/1X3/8 ARBOR FOR GROOVER 12MM BORE 80MM OL

Heavy duty arbor with spacers for 12mm bore slotters with or without bearings. Dimensions: Overall length=83 mm Spindle Length=45mm Threaded par... More Info

£28.66 INC VAT

TREND 35/0X8MMTC KEYHOLE SLOTTER 9.5MM DIA

A keyhole recess for picture hanging flush to the wall. Ref. 35/0 - No.8 & No.10 screw heads. Ref. 35/01 - No.10 & No.12 screw heads. Not suitable ... More Info

£28.38 INC VAT

TREND SP-C209C THREAD GROOVER 10MM X24MM UNC1/4-20

Spare groover to suit C209X1/4TC intumescent strip cutter Dimensions: D=24 mm Kerf=10 mm Grade: TCT Diameter Metric: 24... More Info

£27.21 INC VAT

TREND SP-34/70TC GROOVER FOR PSC/1 3 & 5 6.35X41

Replacement groover for the PSC/1,3 & 5 profile scriber sets. Dimensions: D=41.0 mm Kerf=6.3 mm Grade: TCT Diameter Metric: 41.0... More Info

£25.65 INC VAT

TREND SP-34/73TC GROOVER FOR PSC/20 & 40 6.35X46

Replacement groover for the PSC/20 & 40 profile scriber sets. Dimensions: D=46.0 mm Kerf=6.3 mm Grade: TCT Diameter Metric: 46.0... More Info

£24.91 INC VAT

TREND SP-34/72TC GROOVER FOR PSC/10 30 & 50 4X41

Replacement groover for the PSC/10,30 & 50 profile scriber sets. Dimensions: D=41 mm Kerf=4 mm Grade: TCT Diameter Metric: 41... More Info

£24.91 INC VAT

TREND SP-34/71TC GROOVER FOR PSC/2 & 4 4MMX46MM

Replacement groover for the PSC/2 & 4 profile scriber sets. Dimensions: D=46 mm Kerf=4 mm Grade: TCT Diameter Metric: 46... More Info

£24.91 INC VAT

TREND SP-27/59B SPARE BOTTOM GROOVER 5MM FOR 27/59

Spare bottom groover for the 27/59X1/2TC. Dimensions: Kerf=5 mm ... More Info

£24.52 INC VAT

TREND SP-27/59A SPARE TOP GROOVER 5MM FOR 27/59

Spare top groover for the 27/59X1/2TC. Dimensions: Kerf=5 mm ... More Info

£24.52 INC VAT

TREND SP-27/35B SPARE BOTTOM GROOVER 3MM FOR 27/35

Spare bottom groover for the 27/35X1/2TC. Dimensions: Kerf=3 mm ... More Info

£24.52 INC VAT

TREND SP-C149C SPARE PART GROOVER FOR C149

Replacement groover for the C149. Dimensions: D=41 mm Kerf=6.35 mm Grade: TCT Diameter Metric: 41... More Info

£21.57 INC VAT

TREND 33/60X1/4 ARBOR FOR GROOVER

Standard duty arbor with 1/4 inch spindle and spacers. Enables mounting of 1/4 inch bore slotters with and without bearings in a variety of positio... More Info

£19.62 INC VAT

TREND 33/60X1/2 ARBOR FOR GROOVER

Standard duty arbor with 1/4 inch spindle and spacers. Enables mounting of 1/4 inch bore slotters with and without bearings in a variety of position... More Info

£19.62 INC VAT

TREND SP-C220C GROOVER 15MM KERF X 24MM X 1/4 ID

Replacement slotter for the C220X1/4TC intumescent cutter. Dimensions: D=24 mm Kerf=15 mm Grade: TCT Diameter Metric: 24... More Info

£18.50 INC VAT

TREND 33/20X1/2 ARBOR FOR GROOVER 12MM BORE 61MM OL

Slotters with M12x1.0 threaded bore enables flush recessing in the corner such as for weather proofing. Spacers are supplied to ensure the minimal t... More Info

£18.38 INC VAT

TREND 33/10X1/2 ARBOR FOR 12MM BORE GROOVER 49MM OL

Slotters with M12x1.0 threaded bore enables flush recessing in the corner such as for weather proofing. Spacers are supplied to ensure the minimal th... More Info

£17.94 INC VAT

TREND SP-QUAD/332 GROOVER 47.6MM DIA X 2.38MM THICK

Replacement groover for QUADX1/2TC. Dimensions: D=1 7/8 inch D=47.6 mm E=12.8 mm Kerf=2.4 mm No. of Teeth=2 Grade: TCT Diameter Imperi... More Info

£17.41 INC VAT

TREND SP-876B THREE WING SLOTTER

Replacement slotter for the 876X1/2TC. Dimensions: D=47.6 mm Grade: TCT Diameter Metric: 47.6... More Info

£16.69 INC VAT

TREND SP-QUAD/564 GROOVER 47.6MM DIA X 1.98MM THICK

Replacement groover for QUADX1/2TC. Dimensions: D=1 7/8 inch D=47.6 mm E=12.8 mm Kerf=2 mm No. of Teeth=2 Grade: TCT Diameter Imperial... More Info

£13.93 INC VAT

TREND SP-QUAD/116 GROOVER 47.6MM DIA X 1.6MM THICK

Replacement groover for QUADX1/2TC. Dimensions: D=1 7/8 inch D=47.6 mm E=12.8 mm Kerf=1.6 mm No. of Teeth=2 Grade: TCT Diameter Imperi... More Info

£13.93 INC VAT

TREND 33/10X8MM ARBOR FOR GROOVER 12MM BORE 49MM OL

Slotters with M12x1.0 threaded bore enables flush recessing in the corner such as for weather proofing. Spacers are supplied to ensure the minimal t... More Info

£13.32 INC VAT

TREND 33/20X3/8 ARBOR FOR 12MM BORE GROOVER 61MM OL

Slotters with M12x1.0 threaded bore enables flush recessing in the corner such as for weather proofing. Spacers are supplied to ensure the minimal t... More Info

£12.93 INC VAT

TREND 33/10X3/8 ARBOR FOR 12MM BORE GROOVER 49MM OL

Slotters with M12x1.0 threaded bore enables flush recessing in the corner such as for weather proofing. Spacers are supplied to ensure the minimal t... More Info

£11.97 INC VAT

TREND 33/60X3/8 ARBOR FOR GROOVER

Standard duty arbor with 1/4 inch spindle and spacers. Enables mounting of 1/4 inch bore slotters with and without bearings in a variety of positio... More Info

£11.37 INC VAT

TREND 33/30X8MM ARBOR FOR GROOVER

Replacement arbor for an 8mm bore tool. Dimensions: Overall length=76 mm Shank Diameter=8mm Shank Diameter: 8mm Overall Length Metric: 76... More Info

£9.08 INC VAT

TREND 33/30X3/8 ARBOR FOR GROOVER

Replacement arbor for an 8mm bore tool. Dimensions: Overall length=76 mm Shank Diameter=3/8 inch Shank Diameter: 3/8 Overall Length Metric:... More Info

£8.16 INC VAT

Last Viewed