Chamfer & V Groove, Router Cutters, Trend Routing on Wokingham Tools


Home	About Us	Contact Us	Help

Chamfer & V Groove

Trend Routing > Router Cutters > Chamfer & V Groove

Returned 28 Results

TREND 10/10X1/2TC CHAMFER V GROOVE A=45¡ X 32MM DIA

Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' joint... More Info

£63.90 INC VAT

TREND 10/11X1/2TC CHAMFER V GROOVE A=45¡ X 38MM DIA

Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' joint... More Info

£60.79 INC VAT

TREND 10/12X1/2TC CHAMFER V GROOVE A=45¡ X 51MM DIA

Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' joint... More Info

£106.94 INC VAT

TREND 11/17X1/4TC BEVEL CUTTER A=67.5 DEG X 28MM DIA

Useful for bevelling thick timbers. Certain sizes can be used for jointing, boxes, pilasters and carcassing. Ideal for use by wood turners with smal... More Info

£65.40 INC VAT

TREND 11/1X1/2TC BEVEL CUTTER 30DEG X 21.5MM DIA

Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' joint... More Info

£42.10 INC VAT

TREND 11/1X1/4TC CHAMFER V GROOVE A=30¡ X 21.5MM

Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' joint... More Info

£42.10 INC VAT

TREND 11/30X1/4TC CHAMFER V GROOVE A=45¡ X 25.4MM

Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' joint... More Info

£66.74 INC VAT

TREND 11/3X1/2TC CHAMFER CUTTER 45DEG X19.1MM DIA

Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' joint... More Info

£35.15 INC VAT

TREND 11/3X1/4TC CHAMFER V GROOVE A=45¡X18MM 253349

Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' joint... More Info

£35.15 INC VAT

$TREND 11/3X8MMTC CHAMFER \\\$

TREND 11/3X8MMTC CHAMFER \'V\' GROOVE A=45¡ X 18MM

Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' joint... More Info

£35.15 INC VAT

TREND 11/5X1/2TC BEVEL CUTTER 60DEG X 12.7MM DIA

Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' joint... More Info

£32.76 INC VAT

$TREND 11/5X1/4TC CHAMFER \\\$

TREND 11/5X1/4TC CHAMFER \'V\' GROOVE A=60¡ 257084

Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' joint... More Info

£32.76 INC VAT

$TREND 11/5X8MMTC CHAMFER \\\$

TREND 11/5X8MMTC CHAMFER \'V\' GROOVE A=60¡

Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' joint... More Info

£24.35 INC VAT

TREND 46/360X1/2TC GUIDED CHAMFER 45DEG X 35MM DIA

Ideal for newel posts and caps for stairs. Supplied with one bearing. Dimensions: D=35.1 mm C=12 mm C2=16 mm B=12.7 mm A=45 degrees Shank Di... More Info

£84.97 INC VAT

TREND 765X1/2TC B/GUIDED ADJUST CHAMFER A=45¡

Adjustable trimmer will trim and bevel the top and bottom edges of the workpiece. The width of workpiece accommodated can be adjusted with spacers. ... More Info

£73.76 INC VAT

TREND 767X1/2TC 45¡ & 30¡ CHAMFER SET

This adjustable chamfer set can be used to produce chamfers on the top and bottom edges. The width of timber accommodated by the cutter can be vari... More Info

£77.89 INC VAT

TREND C044X1/2TC CHAMFER 45DEG X 12.7MM DIA

For veining, panelling, 'V' grooving, bevelling & chamfering. Dimensions: D=1/2 inch D=12.7 mm Cut length=15/64 inch Cut length=6 mm A=45 degrees Sha... More Info

£21.17 INC VAT

TREND C046X1/4TC CHAMFER A= 67 DEG X 22.2MM DIA

Two flute cutters for producing extra clean cut bevelled edges. No plunge cut. Dimensions: D=7/8 inch D=22.2 mm Cut length=25/64 inch Cut le... More Info

£21.04 INC VAT

TREND C047X1/4TC CHAMFER A= 60 DEG X 25.4MM DIA

Two flute cutters for producing extra clean cut bevelled edges. No plunge cut. Dimensions: D=1 inch D=25.4 mm Cut length=25/64 inch Cut leng... More Info

£24.91 INC VAT

TREND C048X1/4TC CHAMFER A= 45 DEG X 34.9MM DIA

Two flute cutters for producing extra clean cut bevelled edges. No plunge cut. Dimensions: D=1 3/8 inch D=34.9 mm Cut length=25/64 inch Cut ... More Info

£33.51 INC VAT

TREND C138X1/4TC SELF G/CHAMFER 60 DEG X 12.7MM CUT

Ideal for posts and newel caps for stairs. Dimensions: Cut length=1/2 inch Cut length=12.7 mm B=9.5 mm A=60 degrees Shank Diameter=1/4 inch ... More Info

£32.76 INC VAT

TREND C138X8MMTC SELF G/CHAMFER 60 DEG X 12.7MM CUT

Ideal for posts and newel caps for stairs. Dimensions: C=1/2 inch C=12.7mm B=9.5mm A=60 degrees Shank Diameter=8mm Shank Diameter: 8mm ... More Info

£24.35 INC VAT

TREND C139X1/4TC SELF G/CHAMFER 30 DEG X 7.0MM CUT

Ideal for posts and newel caps for stairs. Dimensions: Cut length=9/32 inch Cut length=7 mm B=9.5 mm A=30 degrees Shank Diameter=1/4 inch ... More Info

£37.36 INC VAT

TREND C197X1/2TC B/GUIDED CHAMFER 45 DEG 51MM DIA

Self-guiding chamfer/bevel cutter. Bearing follows the board beneath. Dimensions: D=51 mm C=25 mm B=12.7 mm A=45 degrees Shank Diameter=1/2 i... More Info

£52.98 INC VAT

TREND SP-338A CHAMFER PROFILE CUTTER 44MM DIA

Replacement chamfer profile cutter for the 338X1/2TC and 339X1/2TC. Dimensions: D=47.0 mm A=45 degrees Grade: TCT Diameter Metric: 47.0 Angle: 45... More Info

£64.38 INC VAT

TREND TR22X1/4TC CHAMFER V GROOVE A=45 DEG X 12.7MM

Ideal for fast chamfering to remove edge on timber or create a decorative edge. Dimensions: D=1/2 inch D=12.7 mm Overall length=53 mm A=45 degr... More Info

£24.18 INC VAT

TREND TR22X8MMTC CHAMFER V GROOVE A=45 DEG X 12.7MM

Ideal for fast chamfering to remove edge on timber or create a decorative edge. Dimensions: D=1/2 inch D=12.7 mm Overall length=53 mm A=45 degrees Sh... More Info

£18.50 INC VAT

TREND TR33X1/4TC GUIDED CHAMFER A=45 DEG X 31.8MM

Ideal for fast chamfering to remove edge on timber or create a decorative edge. Dimensions: D=1 1/4 inches D=31.8 mm Overall length=62 mm B=9.5... More Info

£39.34 INC VAT

All lines on our website are not always stocked in store. Please call before visiting the shop to check stock levels.

----------------

Opening Hours

Weekdays: 9am to 5pm

Saturdays: 9am to 12 noon

Sundays: Closed

----------------

For Safety the number of Customers at any one time is restricted.

If you have forgotten your mask we can serve you at the door.

----------------

Terms & Conditions

We Accept Visa, Mastercard,Maestro,Solo,Visa Electron and Detla.