Laminate Trimmers, Router Cutters, Trend Routing on Wokingham Tools


Home	About Us	Contact Us	Help

Laminate Trimmers

Trend Routing > Router Cutters > Laminate Trimmers

Returned 29 Results

TREND 46/06X1/4TC COMBI TRIMMER A1=90¡ X A2=45¡

A self-guided combination trimmer. A 90 degree trim is obtained by engaging the bottom half. A 45 degree trim is obtained by lowering the cutter. A ... More Info

£60.64 INC VAT

TREND 46/6BX1/4TC BEVEL TRIM A=45¡ X 27MM DIA

Cut a wider edge line, at an angle of 45 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting... More Info

£55.96 INC VAT

TREND 46/6CX1/4TC BEVEL TRIM A=30¡ X 26MM DIA

Cut a wider edge line, at an angle of 30 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting e... More Info

£49.23 INC VAT

TREND 46/6DX1/4TC GUIDED SPECIALIST BEVEL TRIM 8 DEG

Cut a wider edge line, at an angle of 82 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting... More Info

£22.60 INC VAT

TREND 46/7/50X1/4TC B/GUIDED GLAZING BAR 10MM RAD

The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded. Dimensions: D=28 mm Cut length=19 m... More Info

£87.09 INC VAT

TREND 46/7/60X1/2TC DEEP ROUND/OVER 10MM RAD

Simultaneously rounds over and profiles the edge. Ideal for pencil round architrave. Dimensions: D=36 mm D2=16 mm Cut length=29 mm B=16 mm ... More Info

£70.65 INC VAT

TREND 46/75X1/2TC B/GUIDED CLASSIC 6.3MM RAD

Self guiding classic cutters with facility to change profile by fitting larger bearing and varying the depth. Supplied with two bearings. Dimensions... More Info

£65.33 INC VAT

TREND 46/7X1/4TC DOUBLE OVERLAP A=90¡ X 18MM DIA

Trimming top and bottom surfaces simultaneously with bearing following the board. Two fluted. Increased productivity. Dimensions: D=18 mm C=15m... More Info

£76.61 INC VAT

TREND 47/20X1/4TC TRIMMER A=90¡ X 20MM DIA

For trimming the lipping of plastic overlay, and for rebating and machining wood, Duralium and plastics. Tungsten Carbide Tipped. Use at speed 1200... More Info

£32.65 INC VAT

TREND 47/20X8MMTC TRIMMER A=90¡ X 20MM DIA

For trimming the lipping of plastic overlay, and for rebating and machining wood, Duralium and plastics. Tungsten Carbide Tipped. Use at speed 1200... More Info

£34.40 INC VAT

TREND 47/2X1/4TC TRIMMER A-90¡ X 18MM DIA

For trimming the lipping of plastic overlay, and for rebating and machining wood, Duralium and plastics. Tungsten Carbide Tipped. Use at speed 12000... More Info

£49.44 INC VAT

TREND 47/3X1/4TC BEVEL TRIM A=80¡ X 20MM DIA

Three bevel cutters for edging . For trimming laminate, when a wider edge line is preferred on the finished edge. Supplied in 80 degree, 60 degree a... More Info

£29.23 INC VAT

TREND 47/40X1/2TC PIERCE & TRIM 12.7MM DIA TWO FLUTE

Combination pierce and trim cutters. Pierce and cut out apertures in laminate worktops. Base of the cutter acting as a guide follower. Dimension... More Info

£54.29 INC VAT

TREND 47/45X3/8TC PIERCE & TRIM 9.5MM DIA

Combination pierce and trim cutters. Pierce and cut out apertures in laminate worktops. Base of the cutter acting as a guide follower. Dimension... More Info

£25.49 INC VAT

TREND 47/4X1/4TC PIERCE & TRIM 6.3MM DIA 257123

Combination pierce and trim cutters. Pierce and cut out apertures in laminate worktops. Base of the cutter acting as a guide follower. Single flut... More Info

£27.21 INC VAT

TREND 47/50SX1/2TC PIERCE & TRIM 1.27MM X 123MM OL

Combination pierce and trim cutters. Pierce and cut out apertures in laminate worktops. Base of the cutter acting as a guide follower. Specially d... More Info

£67.92 INC VAT

TREND 47/50X1/2TC PIERCE & TRIM 12.7MM DIA

Combination pierce and trim cutters. Pierce and cut out apertures in laminate worktops. Base of the cutter acting as a guide follower. Will trim bott... More Info

£66.27 INC VAT

TREND 47/6AX1/4TC BEVEL TRIM A=60¡ X 24MM DIA

Three bevel cutters for edging . For trimming laminate, when a wider edge line is preferred on the finished edge. Supplied in 80 degree, 60 degree a... More Info

£29.55 INC VAT

TREND 47/7X1/4TC COMBI TRIMMER A=60¡X12MM DIA 253362

For trimming top & lip. Economical cutters, perform 3 functions: 1. To top trim the overlay at 90 degrees. 2. To trim the overlay at 45 degrees or ... More Info

£31.93 INC VAT

TREND 47/8X1/4HSS PIERCE & TRIM 6.3MM DIA

Combination pierce and trim cutters. Pierce and cut out apertures in laminate worktops. Base of the cutter acting as a guide follower. Dimension... More Info

£15.19 INC VAT

TREND 765X1/2TC B/GUIDED ADJUST CHAMFER A=45¡

Adjustable trimmer will trim and bevel the top and bottom edges of the workpiece. The width of workpiece accommodated can be adjusted with spacers. ... More Info

£73.76 INC VAT

TREND S47/4X1/4STC PIERCE/TRIM 6.3MM DIA X 20MM CUT

Combination pierce and trim cutters. Pierce and cut out apertures in laminate worktops. Base of the cutter acting as a guide follower. Single fluted.... More Info

£46.18 INC VAT

TREND S47/70X1/4STC ECONOMY TRIM A=60¡X6.3MM DIA 257121

Solid Tungsten Carbide economy cutter. For use on short runs at 90 degree or 60 degree with Ref. S47/70, at 90 degree or 83 degrees with Ref. S47/71 ... More Info

£41.70 INC VAT

TREND S47/71X1/4STC ECONOMY TRIM 7 DEG BEVEL

Solid Tungsten Carbide economy cutter. For use on short runs at 90 degree or 60 degree with Ref. S47/70, at 90 degree or 83 degrees with Ref. S47/71 ... More Info

£38.70 INC VAT

TREND S47/72X1/4STC ECONOMY V GROOVE 45 DEG

Cutter for trimming and bevelling timber, lippings and plastic laminate. Can only be used in laminate trimming routers, or when straight fence guides ... More Info

£37.77 INC VAT

TREND S48/39X1/4STC ECONOMY TRIM A=90¡X6.3MM DIA X 38MM

Solid Tungsten Carbide economy cutter. Self-guiding 90 degree trimming only with Ref. S48/39 & S48/40. Self guiding at 83 degrees with Ref. S48/41. ... More Info

£38.70 INC VAT

TREND S48/40X1/4STC ECONOMY TRIM A=90¡X6.3DX52MM 257122

Solid Tungsten Carbide economy cutter. Self-guiding 90 degree trimming only with Ref. S48/39 & S48/40. Self guiding at 83 degrees with Ref. S48/41. ... More Info

£44.66 INC VAT

TREND S48/41X1/4STC ECONOMY 7 DEG TRIM GUIDED 6.35MM DI

Solid Tungsten Carbide economy cutter. Self-guiding 90 degree trimming only with Ref. S48/39 & S48/40. Self guiding at 83 degrees with Ref. S48/41. ... More Info

£38.70 INC VAT

TREND S48/42X1/4STC ECONOMY FLUSH & TRIM 6.35MM GUIDED

Solid Tungsten Carbide economy cutter. Self-guiding 90 degree trimming only with Ref. S48/39 & S48/40. Self guiding at 83 degrees with Ref. S48/41. ... More Info

£38.70 INC VAT

Last Viewed