
Home	About Us	Contact Us	Help

Trend

TREND 84/06X1/4TC TAPER REED 4MM RAD X 22MM DIA

Ideal for tapered chair legs. Edge moulding applications only. Dimensions: D=22 mm Cut length=25 mm R=4 mm Shank Diameter=1/4 inch Shan... More Info

£61.32 INC VAT

TREND 84/09X1/4TC DECOR SUNK BEAD 3MM RAD

Gives a narrow appearance to a board edge. Dimensions: D=22 mm Cut length=10 mm R=3 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Grad... More Info

£71.88 INC VAT

TREND 84/10X1/4TC DECOR EDGE 2MM RAD1 X 8MM RAD2

A small decorative edge cutter. Dimensions: D=24 mm Cut length=16 mm R=2 mm R2=8 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Grade... More Info

£54.44 INC VAT

TREND 84/19X1/4TC B/GUIDED SUNK BEAD12MM RAD

This guided concave bead is quick to set up & can be used for curved work. No side fence required. Dimensions: D=22 mm Cut length=16 mm B=16 mm ... More Info

£59.17 INC VAT

TREND 84/21X1/4TC B/GUIDED SUNK BEAD 3MM RAD

Two concave beads or flutes. Ideal for curved edging, with an attractive twin reed effect. Dimensions: Cut length=16 mm B=16 mm R=3 mm Shank D... More Info

£55.96 INC VAT

TREND 84/24X1/4TC 3/GUIDED CAPILL 8MM RAD

A capillary groove for sills and window sections. By changing to a larger bearing, a shallower cut can be obtained. Dimensions: D=28.7 mm Cut ... More Info

£63.57 INC VAT

TREND 84/31X1/4TC PANELLING 4MM RAD

Panel mould and edge mould cutter. Dimensions: D=18 mm D2=10 mm Cut length=10 mm R=4 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Gr... More Info

£48.52 INC VAT

TREND 84/45X1/2TC SUNK BEAD 5MM RAD

Two concave beads or flutes. Ideal for curved edging, with an attractive twin reed effect. One or two beads can be cut by raising or lowering the cu... More Info

£66.78 INC VAT

TREND 84/48X1/2TC SUNK BEAD 12MM RAD X 32MM DIA

Can be used for curved screens, doors etc. A side fence is required. No bottom cut. Dimensions: D=32 mm Cut length=20 mm R=12 mm Shank Diamet... More Info

£58.30 INC VAT

TREND 84/49X1/2TC SUNK BEAD 13MM RAD X 25MM DIA

This quarter radius can produce a sunk bead or a nosing mould. Requires a side fence for guidance. Dimensions: D=25 mm Cut length=20 mm R=13 mm... More Info

£87.87 INC VAT

TREND 84/68X1/2TC PANEL MOULD 6MM RAD X 32MM DIA

Edge moulds of classic proportions. Used to obtain decorative channels. Ref. 84/68 is ideal for thick table tops, frames etc. Dimensions: D=32 ... More Info

£69.14 INC VAT

TREND 84/82X1/2TC DRAWER PULL RAD 11MM RAD

The long cut depth of these cutters allows them to produce under-cut finger grooves. Dimensions: D=22 mm Cut length=32 mm R=11 mm Shank Diamete... More Info

£68.59 INC VAT

TREND 84/83X1/2TC DRAWER PULL RAD 12.5MM RAD

The long cut depth of these cutters allows them to produce under-cut finger grooves. Dimensions: D=25 mm Cut length=32 mm R=12.5 mm Shank Diame... More Info

£85.24 INC VAT

TREND 84/92X1/2TC DRAWER PULL 3.5MM R1 X 6.3MM R2

For Ref. 84/96 use in two passes from left & right to cut a protruding grip handle. Dimensions: D=44.8 mm D2=24 mm Cut length=25.4 mm R=8 mm ... More Info

£121.80 INC VAT

TREND 84/93X1/2TC DRAWER PULL 2MM R1 X 4MM R2

For Ref. 84/96 use in two passes from left & right to cut a protruding grip handle. Dimensions: D=45 mm D2=24 mm Cut length=22 mm R=5 mm R2=... More Info

£133.99 INC VAT

TREND 84/94X1/4TC DRAWER PULL 4MM RAD X 19MM DIA

For Ref. 84/96 use in two passes from left & right to cut a protruding grip handle. Dimensions: D=19 mm Cut length=13 mm R=4 mm Shank Diamete... More Info

£97.44 INC VAT

TREND 84/95X1/2TC DRAWER PULL 6.3MM RAD X 38MM DIA

For Ref. 84/96 use in two passes from left & right to cut a protruding grip handle. Dimensions: D=38 mm D2=22 mm Cut length=17 mm R=6 mm Sha... More Info

£109.62 INC VAT

TREND 84/96X1/2TC DRAWER PULL 2.5MM RAD X 22MM DIA

For Ref. 84/96 use in two passes from left & right to cut a protruding grip handle. Dimensions: D=22 mm Cut length=17 mm R=1.5 mm R2=2 mm Shank Diam... More Info

£95.07 INC VAT

TREND 86/03X1/2TC RADIUS SUNK BEAD 3MM RAD

Concave beads or radiused bottomed grooves. Useful for making drip grooves. Dimensions: D=30 mm Cut length=6 mm R=3 mm Shank Diameter=1/2 in... More Info

£57.36 INC VAT

TREND 86/04X1/2TC RADIUS SUNK BEAD 4MM RAD

Concave beads or radiused bottomed grooves. Useful for making drip grooves. Dimensions: D=30 mm Cut length=8 mm R=4 mm Shank Diameter=1/2 in... More Info

£59.61 INC VAT

TREND 86/05X1/2TC RADIUS SUNK BEAD 5MM RAD

Concave beads or radiused bottomed grooves. Useful for making drip grooves. Dimensions: D=30 mm Cut length=10 mm R=5 mm Shank Diameter=1/2 inch Sh... More Info

£86.97 INC VAT

TREND 865X1/4TC 00NGER JOINTER 24.6MM DIA X 18.5MM

A bearing guided reversible finger jointer, to increase the gluing area for edge to edge joints. Dimensions: D=24.6 mm C=18.5 mm OL=58 mm B=12.... More Info

£75.85 INC VAT

TREND 866X1/2TC FINGER JOINTER SET 1/2

Finger Jointer combines an assembley of five TCT slotting cutters with an abutting-edge cutter to produce a profile that extends the glue line threefo... More Info

£121.80 INC VAT

TREND 87/01X1/2TC OFF SET TONGUE/GROOVER 47.5MM DIA

A heavy duty reversible finger jointer, to increase the gluing area for edge to edge joints. Dimensions: D=47.5 mm D2=37 mm C=30 mm Shank Diame... More Info

£66.10 INC VAT

TREND 876X1/2TC COMB JOINTER SET 1/2

This Comb Jointing Set can be fitted to all heavy duty routers mounted in a fixed head position. It comprises a set of five 4mm kerf, TCT groovers, m... More Info

£145.81 INC VAT

TREND 88/01X1/2TC GLAZING BAR OVOLO 20MM RAD

A large version of a classic moulding for glazing bars, also popular for table and dresser top edge finishes. Dimensions: D=36 mm D2=16 mm Cut length... More Info

£85.24 INC VAT