
Home	About Us	Contact Us	Help

Trend

TREND 1307/38WS SAW FORSTNER 3/8 INCH DIA

Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated. They cut fast, with the grain or across it. They can dr... More Info

£23.77 INC VAT

TREND 1307/58WS SAW FORSTNER 5/8 INCH DIA

Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated. They cut fast, with the grain or across it. They can dr... More Info

£19.92 INC VAT

TREND 1307/78WS SAW FORSTNER 7/8 INCH DIA

Saw Tooth Forstner bits are made from high grade Carbon Steel and meticulously heat treated. They cut fast, with the grain or across it. They can dr... More Info

£22.87 INC VAT

TREND 13F/3X1/4TC PIN GUIDED COVE 9.5MM RAD

Pin guided cutters permit freehand edging at considerable speed. Ideal for cutting small intricate shapes. Dimensions: D=23.8 mm Cut length=16 m... More Info

£36.38 INC VAT

TREND 14/1X1/2TC UP-DOWN CUTTER 12.7MM DIAX38.1MMCUT

Tungsten Carbide Tipped. Two flute cutter with tips sheared up and down, giving a fine finish. For trimming veneered and double-faced boards, plywoo... More Info

£43.41 INC VAT

TREND 14/2X1/2TC UP-DOWN CUTTER 12.7MMDIAX 54MM CUT

Tungsten Carbide Tipped. Two flute cutter with tips sheared up and down, giving a fine finish. For trimming veneered and double-faced boards, plywoo... More Info

£66.27 INC VAT

Trend 15 Piece Starter Router Bit Set 1/2 in

15 piece set containing a range of TCT chrome molydenum steel cutters including bearing guided tools for decorative woodworking. Supplied in a unique ... More Info

£119.54 INC VAT

TREND 15/1X1/2TC COVE 19.1MM RAD X 38.1MM DIA

For coves and part of a rule joint. Dimensions: D=1 1/2 inch D=38.1 mm Cut length=1 1/4 inch Cut length=31.7 mm R=3/4 inch R=19.1 mm Shank D... More Info

£95.07 INC VAT

TREND 15/2X1/2TC COVE 25.4MM RAD X 50.8MM DIA

For coves and part of a rule joint. Dimensions: D=50.8 mm Cut length=1 1/4 inch Cut length=31.7 mm R=1 inches R=25.4 mm Shank Diameter=1/2 in... More Info

£106.94 INC VAT

TREND 15/2X12MMTC COVE 25.4MM RAD X 50.8MM DIA

For coves and part of a rule joint. Dimensions: D=50.8 mm Cut length=1 1/4 inch Cut length=31.7 mm R=1 inch R=25.4 mm Shank Diameter=12mm ... More Info

£77.17 INC VAT

TREND 16/2X1/4TC OVOLO PANEL VEINING CUTTER R4.8MM

A range of small sized panelling cutters. Ideal for veining and fluting applications. Dimensions: D=3/8 inch D=9.5 mm Cut length=7.5 mm R=4.8 ... More Info

£47.49 INC VAT

TREND 16/3X1/4TC OVOLO PANEL VEINING CUTTER R6.0MM

A range of small sized panelling cutters. Ideal for veining and fluting applications. Dimensions: D=13 mm Cut length=12.5 mm R=6 mm Shank Diam... More Info

£51.07 INC VAT

TREND 16/4X1/4TC OVOLO PANEL VEINING CUTTER R7.5MM

A range of small sized panelling cutters. Ideal for veining and fluting applications. Dimensions: D=14.5 mm Cut length=19.5 mm R=7.5 mm Shank ... More Info

£54.62 INC VAT

TREND 17/1X1/4TC GUIDED OVOLO 3MM RAD X 19.1MM DIA

Template thickness should be 5mm thicker than cut length of cutter. Dimensions: D=3/4 inch D=19.1 mm Cut length=3/8 inch Cut length=9.5 mm B=1... More Info

£36.85 INC VAT

TREND 17/2X1/4TC GUIDED OVOLO 5MM RAD X 22MM DIA

Template thickness should be 5mm thicker than cut length of cutter. Dimensions: D=22 mm Cut length=12 mm B=22 mm R=5 mm Shank Diameter=1/4 inc... More Info

£38.56 INC VAT

TREND 17/4X1/2TC GUIDED OVOLO 8MM RAD X 28.6MM DIA

Template thickness should be 5mm thicker than cut length of cutter. Dimensions: D=28.6 mm Cut length=15 mm B=28.6 mm R=5/16 inch R=8 mm Shank... More Info

£48.87 INC VAT

TREND 17/4X1/4TC GUIDED OVOLO 8MM RAD X28.6MM DIA

Template thickness should be 5mm thicker than cut length of cutter. Dimensions: D=28.6 mm Cut length=15 mm B=28.6 mm R=5/16 inch R=8 mm Shank... More Info

£44.15 INC VAT

TREND 18/01X1/2TC PANEL MOULD 3.2MM RAD X 25MM DIA

Panel raisers can be used with guide bush templates for decorative work on panel doors etc. Dimensions: D=25 mm D2=10 mm Cut length=3/8 inch Cu... More Info

£56.19 INC VAT

TREND 18/01X1/4TC PANEL MOULD 3.2MM RAD X 25MM DIA

Panel raisers can be used with guide bush templates for decorative work on panel doors etc. Dimensions: D=25 mm D2=10 mm Cut length=3/8 inch Cu... More Info

£57.88 INC VAT

TREND 18/15X1/4TC PANEL MOULD 26MM RAD X 32MM DIA

Ideal panelling cutter for kitchen or cabinet doors. Dimensions: D=32 mm C=11.5 mm R=26 mm Shank Diameter=1/4 inch Shank Diameter: 1/4 Gr... More Info

£68.59 INC VAT

TREND 18/18X1/2TC DISH PANEL RAIS 50MM RAD

Ideal panelling cutter for kitchen or cabinet doors. Dimensions: D=73 mm Cut length=22 mm R=50 mm Shank Diameter=1/2 inch Shank Diameter: ... More Info

£118.84 INC VAT

TREND 18/19X1/2TC PANEL/BEVEL A=25¡ X 69MM DIA

Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed posi... More Info

£106.94 INC VAT

TREND 18/1X1/2TC PANEL MOULD 3.2MM RAD X 35MM DIA

Panel raisers can be used with guide bush templates for decorative work on panel doors etc. Dimensions: D=35 mm D2=12.5 mm Cut length=3/8 inch ... More Info

£47.27 INC VAT

TREND 18/20X1/2TC PANEL/BEVEL A=10¡ X 50MM DIA

This Raised Panel cutter runs best at lower speeds between 12,000 and 18,000 RPM. Matches our range of profile scribers. Suitable for use on natur... More Info

£95.07 INC VAT

TREND 18/20X8MMTC PANEL/BEVEL A=10¡ 45MM DIA

Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed posi... More Info

£70.67 INC VAT

TREND 18/21X1/2TC RAD/PANEL RAISER 14MM RAD

Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed posi... More Info

£95.07 INC VAT