
Home	About Us	Contact Us	Help

Trend

TREND C122X1/4TC CAVETTO 7.9MM RAD X 15.9MM CUT

Self guiding cavetto style cutter, which follow the board edges for straight or curved work radius. Dimensions: Cut length=5/8 inch Cut length=15... More Info

£51.98 INC VAT

TREND C123X1/4TC TEMPLATE/PROFILE 19.1MM DIA

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cutte... More Info

£31.17 INC VAT

TREND C124X1/4TC STRAIGHT 12.7MM DIA X 12.7MM CUT

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and ... More Info

£13.68 INC VAT

TREND C125X1/4TC STRAIGHT 15.9MM DIA X 12.7MM CUT

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and ... More Info

£15.19 INC VAT

TREND C126X1/4TC ROUND/OVER 4.8MM RAD X 12.7MM CUT

For producing ovolo and rounding over edge moulds, using a side fence or back fence. Dimensions: D=1/2 inch D=12.7 mm Cut length=23/64 inch Cut... More Info

£21.57 INC VAT

TREND C126X8MMTC ROUND/OVER 4.8MM RAD X 12.7MM CUT

For producing ovolo and rounding over edge moulds, using a side fence or back fence. Dimensions: D=1/2 inch D=12.7 mm Cut length=23/64 inch Cut... More Info

£17.41 INC VAT

TREND C127X1/4TC ROUND/OVER 6.3MM RAD X 15.9MM CUT

For producing ovolo and rounding over edge moulds, using a side fence or back fence. Dimensions: D=5/8 inch D=15.9 mm Cut length=13.5 mm R=6.3 ... More Info

£23.26 INC VAT

TREND C127X8MMTC ROUND/OVER 6.3MM RAD X 15.9MM CUT

For producing ovolo and rounding over edge moulds, using a side fence or back fence. Dimensions: D=5/8 inch D=15.9 mm Cut length=13.5 mm R=6.3 ... More Info

£18.52 INC VAT

TREND C128X1/4TC ROUND/OVER 9.5MM RAD X 22.2MM CUT

For producing ovolo and rounding over edge moulds, using a side fence or back fence. Dimensions: D=7/8 inch D=22.2 mm Cut length=19/32 inch Cut... More Info

£27.21 INC VAT

TREND C128X8MMTC ROUND/OVER 9.5MM RAD X 22.2MM CUT

For producing ovolo and rounding over edge moulds, using a side fence or back fence. Dimensions: D=7/8 inch D=22.2 mm Cut length=19/32 inch Cut... More Info

£22.60 INC VAT

Trend C130 x 1/4 TCT Bearing Guided Corner Bead 4.8mm Radius

Attractive edge moulds and a full corner bead can be produced by making a second pass at 90° with this TCT cutter. Used on all man-made boards suc... More Info

£61.43 INC VAT

TREND C130X1/4TC CORNER BEAD 4.8MM RAD X 26MM DIA

Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees. Dimensions: D=1 1/32 inch D=26 mm D2=22 mm... More Info

£51.98 INC VAT

TREND C130X8MMTC CORNER BEAD 4.8MM RAD X 26MM DIA

Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees. Dimensions: D=1 1/32 inch D=26 mm D2=22 mm... More Info

£37.69 INC VAT

TREND C131X1/4TC BROKEN OGEE 2.4MM RAD X 10MM CUT

Ideal for following template. It is advisable that the template is at least 5mm thicker than the cut length of the tool. Dimensions: D=22 mm Cut... More Info

£51.98 INC VAT

TREND C131X8MMTC BROKEN OGEE 2.4MM RAD X 10MM CUT

Ideal for following template. It is advisable that the template is at least 5mm thicker than the cut length of the tool. Dimensions: D=22 mm Cut len... More Info

£50.70 INC VAT

TREND C133X1/4TC OVERLAP TRIM 12.7MM DIA

This 'roughing' trimmer, leaves an overhang of 3mm, for secondary final trimm. Dimensions: D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25... More Info

£33.59 INC VAT

TREND C133X8MMTC OVERLAP TRIM 12.7MM DIA

This 'roughing' trimmer, leaves an overhang of 3mm, for secondary final trimm. Dimensions: D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm ... More Info

£32.76 INC VAT

TREND C134X1/4TC THREE FLUTE TRIM 12.7MM DIA

Three flute self-guiding for extra fine trimming of laminate or plywood overlay. Dimensions: D=1/2 inch D=12.7 mm Cut length=1/2 inch Cut lengt... More Info

£21.57 INC VAT

TREND C135X1/4TC PIERCE/TRIM 6.3MM DIA X 18MM CUT

Cuts out apertures in laminate worktops. The nose of the cutter acts as a guide follower. Dimensions: D=1/4 inch D=6.3 mm Cut length=45/64 inch Cut ... More Info

£20.44 INC VAT

TREND C135X8MMTC PIERCE/TRIM 6.3MM DIA X 18MM CUT

Cuts out apertures in laminate worktops. The nose of the cutter acts as a guide follower. Dimensions: D=1/4 inch D=6.3 mm Cut length=45/64 inch... More Info

£21.57 INC VAT

TREND C138X1/4TC SELF G/CHAMFER 60 DEG X 12.7MM CUT

Ideal for posts and newel caps for stairs. Dimensions: Cut length=1/2 inch Cut length=12.7 mm B=9.5 mm A=60 degrees Shank Diameter=1/4 inch ... More Info

£33.59 INC VAT

TREND C138X8MMTC SELF G/CHAMFER 60 DEG X 12.7MM CUT

Ideal for posts and newel caps for stairs. Dimensions: C=1/2 inch C=12.7mm B=9.5mm A=60 degrees Shank Diameter=8mm Shank Diameter: 8mm ... More Info

£24.35 INC VAT

TREND C139X1/4TC SELF G/CHAMFER 30 DEG X 7.0MM CUT

Ideal for posts and newel caps for stairs. Dimensions: Cut length=9/32 inch Cut length=7 mm B=9.5 mm A=30 degrees Shank Diameter=1/4 inch ... More Info

£38.30 INC VAT

Trend C140 x 1/4 TCT Bearing Guided Corner Bead 3.2mm Radius

Attractive edge moulds and a full corner bead can be produced by making a second pass at 90° . Used on all man-made boards such as medium density ... More Info

£55.69 INC VAT

TREND C140X1/4TC CORNER BEAD 3.2MM RAD

Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees. Dimensions: D=7/8 inch D=22.3 mm D2=20 mm ... More Info

£47.13 INC VAT

TREND C141X1/4TC PANEL/VEINING 4.8MM RAD

For decorative panel and veining work. Ideal for carving with the Routerlathe. Dimensions: D=3/8 inch D=9.5 mm Cut length=7.5 mm R=4.8 mm ... More Info

£27.96 INC VAT