
Home	About Us	Contact Us	Help

Trend

TREND C193X1/2TC B/GUIDED REBATER 31.8MM DIA X 15.9M

These cutters are self-guiding and can be used to produce rebates, lap joints, tongues and rebated corners. When using bearing Ref. B95A make two pa... More Info

£41.51 INC VAT

TREND C193X1/4TC B/GUIDED REBATER 31.8MM DIA X 15.9M

These cutters are self-guiding and can be used to produce rebates, lap joints, tongues and rebated corners. When using bearing Ref. B95A make two pa... More Info

£41.51 INC VAT

TREND C194X1/2TC STAGGERED MORTISE CUT 16DIA X50 CUT

TCT cutter with staggered cutting surfaces. Deep mortising and grooving giving good chip clearance. For lock mortising, two width cuts will be need... More Info

£39.22 INC VAT

TREND C195X1/2TC B/GUIDED TRIMMER 12.7MM DIA X 50MM

Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Dimensions: D=1/2 inch D=12.7 mm Cut length=50 mm B=... More Info

£29.62 INC VAT

TREND C196X1/2TC B/GUIDED TRIMMER 12.7MM DIA X 38MM

Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Dimensions: D=1/2 inch D=12.7 mm Cut length=38 mm B=... More Info

£27.21 INC VAT

TREND C197X1/2TC B/GUIDED CHAMFER 45 DEG 51MM DIA

Self-guiding chamfer/bevel cutter. Bearing follows the board beneath. Dimensions: D=51 mm C=25 mm B=12.7 mm A=45 degrees Shank Diameter=1/2 i... More Info

£54.29 INC VAT

TREND C198X1/2TC B/GUIDED R/OVER OVOLO 16MM RAD

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-o... More Info

£43.17 INC VAT

TREND C199X1/2TC DOUBLE GUIDED TRIMMER 19.1MM X 50MM

Allows templates to be placed either on top or the bottom of the material, for ease of routing. Dimensions: D=19 mm Cut length=50 mm B=19 mm A=... More Info

£59.14 INC VAT

TREND C200DX1/2TC TWO FLUTE 12MM X 50MM 93MM OL CW CT

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and ... More Info

£29.62 INC VAT

TREND C200DX12MMTC TWO FLUTE 12MM X 50MM 93MM OL CW CT

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and ... More Info

£29.62 INC VAT

TREND C200X1/2TC TWO FLUTE 12MM X 50MM X 93MM OL

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and ... More Info

£20.06 INC VAT

TREND C201X1/2TC B/GUIDED CLASSIC 5.2MM RAD

Ideal for following template. It is advisable that the template is at least 5mm thicker than the cut length of the tool. Dimensions: D=35 mm Cut... More Info

£57.44 INC VAT

TREND C203X1/2TC B/GUIDED CLASSIC PANEL 6.3MM RAD

Ideal for following template. It is advisable that the template is at least 5mm thicker than the cut length of the tool. Dimensions: D=35 mm Cut... More Info

£57.44 INC VAT

TREND C204X1/2TC EASYSET PROFILE SCRIBE BEVEL 10DEG

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, comp... More Info

£85.24 INC VAT

TREND C204X12MMTC EASYSET PROFILE SCRIBE BEVEL 10DEG

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, comp... More Info

£61.82 INC VAT

TREND C205X1/4TC B/GUIDED 3 FLUTE TRIMMER 12.7 X 25

Self-guiding triple flute cutter. Extra fine trimming and longer life. For trimming of laminate or plywood overlay. Dimensions: D=1/2 inch ... More Info

£24.77 INC VAT

TREND C206X1/2TC AQUAMAC 63 RECESSER 41.3MM DIA

Recessing cutter will accommodate the Schlegel Aquamac 63 weather strip system and allows for a particularly small gap between sash and frame. The ... More Info

£71.88 INC VAT

TREND C207X1/2TC AQUAMAC 21 RECESSER 54.5MM DIA

Recessing cutter will accommodate the Schlegel Aquamac 21 seal. This cutter is designed for use with the Aquamac seal in a wiping mode and comes co... More Info

£71.88 INC VAT

TREND C208X1/2TC INTUMESCENT CUTTER SET 10MM X 40MM

For either frame or door applications, with standard Intumescent Strip. Neatly cuts grooves on doors or frames to accept Intumescent Strip which ena... More Info

£54.29 INC VAT

Trend C209 x 1/4 TCT Intumescent Recessor 10 x 24mm

Trend Craft Pro Intumescent Strip Cutter cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent ... More Info

£44.35 INC VAT

TREND C209X1/4TC INTUMESCENT CUTTER SET 10MM X 24MM

For either frame or door applications, with standard Intumescent Strip. Neatly cuts grooves on doors or frames to accept Intumescent Strip which ena... More Info

£37.53 INC VAT

TREND C210X1/2TC WEATHERSEAL GROOVER 2X 7 X 36MM DIA

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is Teflon cutted to reduce resin build up. ... More Info

£50.33 INC VAT

TREND C211X1/2TC WEATHERSEAL GROOVER 2.5X7X 36MM DIA

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is Teflon cutted to reduce resin build up. ... More Info

£50.33 INC VAT

TREND C212X1/2TC WEATHERSEAL GROOVER 2.8X7X 36MM DIA

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is Teflon cutted to reduce resin build up. ... More Info

£50.33 INC VAT

TREND C213X1/2TC WEATHERSEAL GROOVER 3 X 7X 36MM DIA

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is Teflon cutted to reduce resin build up. ... More Info

£50.33 INC VAT

TREND C214X1/2TC B/GUIDED 3 DEG UNDERCUT 50MM CUT

3 degree undercut router bit with shank mounted bearing guide for routing a leading edge on doors to allow a tight fit against jamb. Dimensions: D... More Info

£81.48 INC VAT