Trend
  Home About Us Contact Us Help  
Search

Categories
Abrasives
Armorgard
Decorating
Drill Bits
Fixings
Footprint Tools
Garden Tools
Hand Tools
Hardware & Ironmongery
Holesaws
Home & Leisure
Power Tool Accessories
Power Tools
RIDGID TOOLS
Safety
Tool Storage
Trend Routing
Workwear
Full Product Index

Brands
Browse By Brand
Trend items are stocked by Wokingham Tools

Trend


Trend

TREND RT/KEY ROTATIP SPARE TORX KEY T15
TREND RT/KEY ROTATIP SPARE TORX KEY T15

Replacement key for the rota-tip cutters. Gives positive and quick action to help prevent overtightening and to allow quick tightening of the screw. ... More Info

£6.36 INC VAT
TREND RT/KEY/1.5 ROTATIP SPARE HEX KEY 1.5MM A/F
TREND RT/KEY/1.5 ROTATIP SPARE HEX KEY 1.5MM A/F

Replacement key for the rota-tip cutters. Gives positive and quick action to help prevent overtightening and to allow quick tightening of the screw. ... More Info

£8.07 INC VAT
TREND RT/KEY/T9 ROTATIP SPARE TORX KEY T9
TREND RT/KEY/T9 ROTATIP SPARE TORX KEY T9

Torx key... More Info

£6.36 INC VAT
TREND RT/M3.0 SCREW DOME M3X4MM SKT
TREND RT/M3.0 SCREW DOME M3X4MM SKT

Dome screw. Dimensions: M3 x 4mm... More Info

£3.63 INC VAT
TREND RTI/PLATE ROUTER TABLE INSERT PLATE
TREND RTI/PLATE ROUTER TABLE INSERT PLATE

A large rigid router table insert plate for incorporation into user-made router tables. A large rigid router table insert plate for incorporation i... More Info

£74.26 INC VAT
TREND RTI/SHIELD RTI/PLATE EYE & FACE SHIELD
TREND RTI/SHIELD RTI/PLATE EYE & FACE SHIELD

A shield is available for use with the Router Table Insert Plate, when using guided cutters and no backfence.... More Info

£25.62 INC VAT
TREND RTS/1000 ROUTER T SQUARE 1000MM
TREND RTS/1000 ROUTER T SQUARE 1000MM

A large 1 metre long bladed T-square for use with a router. Blade has two parallel edges to allow a router to run on both edges. Allows a router to ... More Info

£93.87 INC VAT
TREND RUST/60 SPRAY PROTECTOR/DISPLACER 60ML
TREND RUST/60 SPRAY PROTECTOR/DISPLACER 60ML

Protects cutting tools against rust. Cleans thoroughly to penetrate and loosen rusted components. Penetrating and lubricates to stop squeaking. Dri... More Info

£3.37 INC VAT
TREND S11/01X1/4STC ENGRAVER 82.5 DEG X 5MM DIA
TREND S11/01X1/4STC ENGRAVER 82.5 DEG X 5MM DIA

Solid Carbide for long life. Ideal for engraving and veining work. Dimensions: D=5 mm C=15 mm C2=16 mm A=82.5 degrees Shank Diameter=1/4 inch... More Info

£63.09 INC VAT
TREND S11/03X3MMSTC ENGRAVER 45 DEG X 3MM DIA
TREND S11/03X3MMSTC ENGRAVER 45 DEG X 3MM DIA

Solid Carbide for long life. Ideal for engraving and veining work. Dimensions: D=3 mm C=3 mm OL=39 mm A=45 degrees Shank Diameter=3mm Sh... More Info

£28.77 INC VAT
TREND S11/11X1/4STC TRIPLE FLUTE ENGRAVER A=60¡ 257083
TREND S11/11X1/4STC TRIPLE FLUTE ENGRAVER A=60¡ 257083

Cuts cleanly without feather edging. Solid Carbide for long life. Cuts to a fine' V' groove point. Ideal for sign writing. Dimensions: D=14.... More Info

£87.44 INC VAT
TREND S11/11X8MMSTC TRIPLE FLUTE ENGRAVER A=60¡
TREND S11/11X8MMSTC TRIPLE FLUTE ENGRAVER A=60¡

Cuts cleanly without feather edging. Solid Carbide for long life. Cuts to a fine ' V' groove point. Ideal for sign writing. Dimensions: D=14... More Info

£87.44 INC VAT
TREND S2/60X1/4STC SINGLE FLUTE 6.3MM DIA X 19MM CUT
TREND S2/60X1/4STC SINGLE FLUTE 6.3MM DIA X 19MM CUT

Greater duribility. Better plunge characteristics. Single flute - faster feed rates. Single flute cutters should not be used in eccentric chucks. Dim... More Info

£44.32 INC VAT
TREND S2/6X1/4STC SINGLE FLUTE 6.3MM DIA X 10MM CUT
TREND S2/6X1/4STC SINGLE FLUTE 6.3MM DIA X 10MM CUT

Greater duribility. Better plunge characteristics. Single flute - faster feed rates. Single flute cutters should not be used in eccentric chucks. Dim... More Info

£51.54 INC VAT
TREND S3/12X1/4STC TWO FLUTE 6.3MM DIA X 11MM CUT
TREND S3/12X1/4STC TWO FLUTE 6.3MM DIA X 11MM CUT

Greater duribility. Better plunge characteristics. Two flute - finer finish. Dimensions: D=1/4 inch D=6.3 mm C=11 mm OL=51 mm Shank Diameter... More Info

£35.35 INC VAT
Trend S3/21 x 1/4 Solid Two Flute Cutter 6.3mm x 28mm
Trend S3/21 x 1/4 Solid Two Flute Cutter 6.3mm x 28mm

The Trend Solid Tungsten Carbide two flute cutters are turned, milled and ground from a solid piece of Tungsten Carbide and provide the greatest durab... More Info

£66.33 INC VAT
TREND S3/21X1/4STC TWO FLUTE 6.3MM DIA X 28MM CUT
TREND S3/21X1/4STC TWO FLUTE 6.3MM DIA X 28MM CUT

Greater duribility. Better plunge characteristics. Two flute - finer finish. Dimensions: D=1/4 inch D=6.3 mm C=28 mm OL=63 mm Shank Diameter=1/4 inch... More Info

£58.03 INC VAT
Trend S3/22 x 1/4 Solid Two Flute Cutter 6.3mm x 25mm
Trend S3/22 x 1/4 Solid Two Flute Cutter 6.3mm x 25mm

The Trend Solid Tungsten Carbide two flute cutters are turned, milled and ground from a solid piece of Tungsten Carbide and provide the greatest durab... More Info

£41.61 INC VAT
TREND S3/22X1/4STC TWO FLUTE 6.3MM DIA X 25MM 253336
TREND S3/22X1/4STC TWO FLUTE 6.3MM DIA X 25MM 253336

Greater duribility. Better plunge characteristics. Two flute - finer finish. Dimensions: D=1/4 inch D=6.3 mm C=25 mm OL=50 mm Shank Diameter... More Info

£48.75 INC VAT
TREND S3/50X3/8STC TWO FLUTE 9.5MM DIA X 25MM CUT
TREND S3/50X3/8STC TWO FLUTE 9.5MM DIA X 25MM CUT

Greater duribility. Better plunge characteristics. Two flute - finer finish. Dimensions: D=3/8 inch D=9.5 mm C=25 mm OL=63 mm Shank Diameter... More Info

£50.17 INC VAT
TREND S3/81X1/2STC TWO FLUTE 12.7MM DIA X 32MM CUT
TREND S3/81X1/2STC TWO FLUTE 12.7MM DIA X 32MM CUT

Greater duribility. Better plunge characteristics. Two flute - finer finish. Dimensions: D=1/2 inch D=12.7 mm C=32 mm OL=77 mm Shank Diamete... More Info

£124.99 INC VAT
TREND S31/11X1/4STC DOVETAIL A=98 DEG X 6.0MM DIA
TREND S31/11X1/4STC DOVETAIL A=98 DEG X 6.0MM DIA

For dovetail joints and sliding dovetails. To suit user preference, the table shows angles from the horizontal and the profiles show angles from the ... More Info

£28.95 INC VAT
TREND S47/4X1/4STC PIERCE/TRIM 6.3MM DIA X 20MM CUT
TREND S47/4X1/4STC PIERCE/TRIM 6.3MM DIA X 20MM CUT

Combination pierce and trim cutters. Pierce and cut out apertures in laminate worktops. Base of the cutter acting as a guide follower. Single fluted.... More Info

£46.18 INC VAT
TREND S47/70X1/4STC ECONOMY TRIM A=60¡X6.3MM DIA 257121
TREND S47/70X1/4STC ECONOMY TRIM A=60¡X6.3MM DIA 257121

Solid Tungsten Carbide economy cutter. For use on short runs at 90 degree or 60 degree with Ref. S47/70, at 90 degree or 83 degrees with Ref. S47/71 ... More Info

£41.70 INC VAT
TREND S47/71X1/4STC ECONOMY TRIM 7 DEG BEVEL
TREND S47/71X1/4STC ECONOMY TRIM 7 DEG BEVEL

Solid Tungsten Carbide economy cutter. For use on short runs at 90 degree or 60 degree with Ref. S47/70, at 90 degree or 83 degrees with Ref. S47/71 ... More Info

£38.70 INC VAT
TREND S47/72X1/4STC ECONOMY V GROOVE 45 DEG
TREND S47/72X1/4STC ECONOMY V GROOVE 45 DEG

Cutter for trimming and bevelling timber, lippings and plastic laminate. Can only be used in laminate trimming routers, or when straight fence guides ... More Info

£37.77 INC VAT

Previous Page
Next Page


[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21][22][23][24][25]

All lines on our website are not always stocked in store. Please call before visiting the shop to check stock levels.

----------------

Opening Hours

Weekdays:  9am to 5pm

Saturdays:  9am to 12 noon

Sundays:  Closed

----------------

For Safety the number of Customers at any one time is restricted. 

If you have forgotten your mask we can serve you at the door.

----------------

Mitutoyo
Arrow
Swarfega
Bessey
Priory
  Terms & Conditions  
Powered By TABS For Tools We Accept Visa, Mastercard,Maestro,Solo,Visa Electron and Detla.  

© 2025 Wokingham Tools  
Thursday 15th May 2025