
Home	About Us	Contact Us	Help

Trend

TREND 46/66X1/2TC B/GUIDED OGEE 6.3MM RAD

Supplied with two bearings. The larger bearing removes the bottom quirk. Dimensions: D=35 mm Cut length=17.5 mm B=9.5 mm B2=12.7 mm R=6.3 mm ... More Info

£43.56 INC VAT

TREND 46/66X1/4TC B/GUIDED OGEE 6.3MM RAD

Supplied with two bearings. The larger bearing removes the bottom quirk. Dimensions: D=35 mm Cut length=17.5 mm B=9.5 mm B2=12.7 mm R=6.3 mm ... More Info

£43.56 INC VAT

TREND 46/67X1/2TC B/GUIDED OGEE 9.5MM RAD

Supplied with two bearings. The larger bearing removes the bottom quirk. Dimensions: D=63 mm Cut length=20 mm B=9.5 mm B2=12.7 mm R=9.5 mm R... More Info

£109.62 INC VAT

TREND 46/68X1/2TC GUIDED CLASSIC 3MM R1 X 8MM R2

Edge moulds for plinths and plaques. Dimensions: D=38 mm Cut length=14 mm B=12.7 mm R=3 mm R2=8 mm Shank Diameter=1/2 inch Shank Diamete... More Info

£60.18 INC VAT

TREND 46/6AX1/4TC BEVEL TRIM A=60¡ X 28MM DIA

Cut a wider edge line, at an angle of 60 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting e... More Info

£53.84 INC VAT

TREND 46/6BX1/4TC BEVEL TRIM A=45¡ X 27MM DIA

Cut a wider edge line, at an angle of 45 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting... More Info

£55.96 INC VAT

TREND 46/6CX1/4TC BEVEL TRIM A=30¡ X 26MM DIA

Cut a wider edge line, at an angle of 30 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting e... More Info

£49.23 INC VAT

TREND 46/6DX1/4TC GUIDED SPECIALIST BEVEL TRIM 8 DEG

Cut a wider edge line, at an angle of 82 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting... More Info

£22.60 INC VAT

Trend 46/7/50 x 1/4 TCT Bearing Guided Glazing Bar 10mm Radius

Bearing guided glazing bar Ovolo jointing cutters. The glazing bar Ovolo cutter is bearing guided to speed setting up and to enable curved frames to b... More Info

£76.88 INC VAT

TREND 46/7/50X1/4TC B/GUIDED GLAZING BAR 10MM RAD

The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded. Dimensions: D=28 mm Cut length=19 m... More Info

£87.09 INC VAT

TREND 46/7/60X1/2TC DEEP ROUND/OVER 10MM RAD

Simultaneously rounds over and profiles the edge. Ideal for pencil round architrave. Dimensions: D=36 mm D2=16 mm Cut length=29 mm B=16 mm ... More Info

£70.65 INC VAT

TREND 46/70X1/4TC B/GUIDED CLASSIC 5MM RAD

Self guiding classic cutters with facility to change profile by fitting larger bearing and varying the depth. Supplied with two bearings. Dimensio... More Info

£42.51 INC VAT

TREND 46/71X1/2TC B/GUIDED CLASSIC 6MM RAD

Self guiding classic cutters with facility to change profile by fitting larger bearing and varying the depth. Supplied with two bearings. Dimensio... More Info

£48.56 INC VAT

TREND 46/71X1/4TC B/GUIDED CLASSIC 6MM RAD

Self guiding classic cutters with facility to change profile by fitting larger bearing and varying the depth. Supplied with two bearings. Dimensio... More Info

£48.56 INC VAT

TREND 46/75X1/2TC B/GUIDED CLASSIC 6.3MM RAD

Self guiding classic cutters with facility to change profile by fitting larger bearing and varying the depth. Supplied with two bearings. Dimensions... More Info

£65.33 INC VAT

TREND 46/75X1/4TC B/GUIDED CLASSIC 6.3MM RAD

Self guiding classic cutters with facility to change profile by fitting larger bearing and varying the depth. Supplied with two bearings. Dimensio... More Info

£38.84 INC VAT

TREND 46/7X1/4TC DOUBLE OVERLAP A=90¡ X 18MM DIA

Trimming top and bottom surfaces simultaneously with bearing following the board. Two fluted. Increased productivity. Dimensions: D=18 mm C=15m... More Info

£76.61 INC VAT

TREND 46/8/50X1/2TC GUIDED GLAZING BAR 17MM RAD

The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded. Dimensions: D=27 mm Cut length=17 ... More Info

£87.09 INC VAT

TREND 46/8/50X1/4TC GUIDED GLAZING BAR 17MM RAD

The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded. Dimensions: D=27 mm Cut length=17 m... More Info

£87.09 INC VAT

Trend 46/80 x 1/4 TCT 90° Bearing Guided Triple Flute Cutter 12.7 x 25.4mm

Self-guiding triple flute cutters provide a super fine finish and longer life. Suitable for laminate or plywood overlay.An industrial profiling tool f... More Info

£43.49 INC VAT

TREND 46/80X1/4TC TRIMMING 12.7MM DIA X 25.4MM 257120

Self-guiding triple flute cutter. Extra fine trimming and longer life. For trimming of laminate or plywood overlay etc. Ref 46/82 has twin bearings... More Info

£36.80 INC VAT

Trend 46/82 x 1/2 TCT 90° Bearing Guided Triple Flute Cutter 12.7 x 38.1mm

Self-guiding triple flute cutters provide a super fine finish and longer life. Suitable for laminate or plywood overlay.This trimmer has twin bearings... More Info

£91.62 INC VAT

TREND 46/82X1/2TC TRIMMING 12.7MM DIA X 38.1MM CUT

Self-guiding triple flute cutter. Extra fine trimming and longer life. For trimming of laminate or plywood overlay etc. Ref 46/82 has twin bearings... More Info

£77.52 INC VAT

TREND 46/85X1/4TC TRIMMER & V GROOVE 12.7MM DIA

Two flute. For trimming of laminate and solid lipping. 1.6mm deep 'V' groove to hide glue line. Dimensions: D=16 mm D2=12.7 mm C=1 inch C=25.4 mm ... More Info

£33.51 INC VAT

$TREND 46/9/50X1/4TC B/GUIDED R\\\$

TREND 46/9/50X1/4TC B/GUIDED R\'OVER QUEEN ANNE R42MM

For window boards 25mm thick. Two passes create shallow nosing. Dimensions: D=15/16 inch D=23.7 mm Cut length=3/4 inch Cut length=19.0 mm Overall le... More Info

£75.85 INC VAT

TREND 46/9/60X1/4TC B/GUIDED WINDOW BOARD CUTTER R16MM

For window boards 25mm thick. Two passes create shallow nosing. Dimensions: D=30 mm Cut length=16 mm B=12.7 mm R=16 mm Shank Diameter=1/4 inc... More Info

£56.72 INC VAT