Trend
  Home About Us Contact Us Help  
Search

Categories
Abrasives
Armorgard
Decorating
Drill Bits
Fixings
Footprint Tools
Garden Tools
Hand Tools
Hardware & Ironmongery
Holesaws
Home & Leisure
Power Tool Accessories
Power Tools
RIDGID TOOLS
Safety
Tool Storage
Trend Routing
Workwear
Full Product Index

Brands
Browse By Brand
Trend items are stocked by Wokingham Tools

Trend


Trend

TREND SNAP/FB/38 SNAPPY FLAT BIT 38MM
TREND SNAP/FB/38 SNAPPY FLAT BIT 38MM

An economical bit for cutting quick holes in timber. With centre point, back tapered cutting edge and ground chip breakers. Dimensions: D=38 mm Overa... More Info

£6.30 INC VAT
TREND SNAP/FB/8 SNAPPY FLAT BIT 8MM
TREND SNAP/FB/8 SNAPPY FLAT BIT 8MM

An economical bit for cutting quick holes in timber. With centre point, back tapered cutting edge and ground chip breakers. Dimensions: D=8 mm Overal... More Info

£3.63 INC VAT
TREND SNAP/FB/EXT SNAPPY 300MM FLAT BIT EXTENSION
TREND SNAP/FB/EXT SNAPPY 300MM FLAT BIT EXTENSION

Flat bit extension. Minimum diameter of flat bit that can be used is 16.0mm. Dimensions: Overall length=300 mm Shank Diameter=1/4 inch hex ... More Info

£10.62 INC VAT
TREND SNAP/FB1/SET SNAPPY 3PC FLAT BIT SET 16/19/25MM
TREND SNAP/FB1/SET SNAPPY 3PC FLAT BIT SET 16/19/25MM

Economical bits for cutting quick holes in timber. With centre point, back tapered cutting edge and ground chip breakers. Dimensions: Overall len... More Info

£11.20 INC VAT
Trend SNAP/FLIP/SET 4pc Flip Driver Set
Trend SNAP/FLIP/SET 4pc Flip Driver Set

A four piece drill countersinking and screwdriving flip over set.... More Info

£22.53 INC VAT
TREND SNAP/FLIP/SET SNAPPY FLIP DRIVER SET 4PC
TREND SNAP/FLIP/SET SNAPPY FLIP DRIVER SET 4PC

A four piece drill countersinking and screwdriving flip over set. Supplied with quick-change shank for fitting into Snappy Quick Chuck. Drill length... More Info

£20.92 INC VAT
TREND SNAP/FS/10 SNAPPY FORSTNER 10MM
TREND SNAP/FS/10 SNAPPY FORSTNER 10MM

High quality forged and ground carbon steel short Forstner bit for drilling accurate holes. For use with the Snappy Quick Chuck. Will also drill ove... More Info

£16.61 INC VAT
TREND SNAP/FS/12 SNAPPY FORSTNER 12MM
TREND SNAP/FS/12 SNAPPY FORSTNER 12MM

High quality forged and ground carbon steel short Forstner bit for drilling accurate holes. For use with the Snappy Quick Chuck. Will also drill ove... More Info

£16.61 INC VAT
TREND SNAP/FS/15 SNAPPY FORSTNER 15MM
TREND SNAP/FS/15 SNAPPY FORSTNER 15MM

High quality forged and ground carbon steel short Forstner bit for drilling accurate holes. For use with the Snappy Quick Chuck. Will also drill ove... More Info

£18.36 INC VAT
TREND SNAP/FS/16 SNAPPY FORSTNER 16MM
TREND SNAP/FS/16 SNAPPY FORSTNER 16MM

High quality forged and ground carbon steel short Forstner bit for drilling accurate holes. For use with the Snappy Quick Chuck. Will also drill overl... More Info

£14.91 INC VAT
TREND SNAP/FS/18 SNAPPY FORSTNER 18MM
TREND SNAP/FS/18 SNAPPY FORSTNER 18MM

High quality forged and ground carbon steel short Forstner bit for drilling accurate holes. For use with the Snappy Quick Chuck. Will also drill ove... More Info

£19.41 INC VAT
TREND SNAP/FS/20 SNAPPY FORSTNER 20MM
TREND SNAP/FS/20 SNAPPY FORSTNER 20MM

High quality forged and ground carbon steel short Forstner bit for drilling accurate holes. For use with the Snappy Quick Chuck. Will also drill ove... More Info

£22.70 INC VAT
TREND SNAP/FS/22 SNAPPY FORSTNER 22MM
TREND SNAP/FS/22 SNAPPY FORSTNER 22MM

High quality forged and ground carbon steel short Forstner bit for drilling accurate holes. For use with the Snappy Quick Chuck. Will also drill overl... More Info

£15.57 INC VAT
TREND SNAP/FS/24 SNAPPY FORSTNER 24MM
TREND SNAP/FS/24 SNAPPY FORSTNER 24MM

High quality forged and ground carbon steel short Forstner bit for drilling accurate holes. For use with the Snappy Quick Chuck. Will also drill overl... More Info

£19.05 INC VAT
TREND SNAP/FS/25 SNAPPY FORSTNER 25MM
TREND SNAP/FS/25 SNAPPY FORSTNER 25MM

High quality forged and ground carbon steel short Forstner bit for drilling accurate holes. For use with the Snappy Quick Chuck. Will also drill ove... More Info

£25.33 INC VAT
TREND SNAP/FS/26 SNAPPY FORSTNER 26MM
TREND SNAP/FS/26 SNAPPY FORSTNER 26MM

High quality forged and ground carbon steel short Forstner bit for drilling accurate holes. For use with the Snappy Quick Chuck. Will also drill overl... More Info

£18.39 INC VAT
TREND SNAP/FS/28 SNAPPY FORSTNER 28MM
TREND SNAP/FS/28 SNAPPY FORSTNER 28MM

High quality forged and ground carbon steel short Forstner bit for drilling accurate holes. For use with the Snappy Quick Chuck. Will also drill overl... More Info

£19.05 INC VAT
TREND SNAP/FS/30 SNAPPY FORSTNER 30MM
TREND SNAP/FS/30 SNAPPY FORSTNER 30MM

High quality forged and ground carbon steel short Forstner bit for drilling accurate holes. For use with the Snappy Quick Chuck. Will also drill ove... More Info

£27.78 INC VAT
TREND SNAP/FS/35 SNAPPY FORSTNER 35MM
TREND SNAP/FS/35 SNAPPY FORSTNER 35MM

High quality forged and ground carbon steel short Forstner bit for drilling accurate holes. For use with the Snappy Quick Chuck. Will also drill ove... More Info

£27.78 INC VAT
TREND SNAP/FS1/SET SNAPPY 5 PC FORSTNER SET 15-35MM
TREND SNAP/FS1/SET SNAPPY 5 PC FORSTNER SET 15-35MM

High quality forged and ground carbon steel short Forstner bits for drilling accurate holes. For use with the Snappy Quick Chuck. Will also drill over... More Info

£89.89 INC VAT
TREND SNAP/GD/10MM SNAPPY GLASS DRILL 10MM
TREND SNAP/GD/10MM SNAPPY GLASS DRILL 10MM

TCT drill for use on glass, porcelain, tile and mirrors. Not for use on toughened glass. A coolant must be used. Dimensions: D=10 mm Shank Diamete... More Info

£11.26 INC VAT
TREND SNAP/GD/12MM SNAPPY GLASS DRILL 12MM
TREND SNAP/GD/12MM SNAPPY GLASS DRILL 12MM

TCT drill for use on glass, porcelain, tile and mirrors. Not for use on toughened glass. A coolant must be used. Dimensions: D=12 mm Shank Diamete... More Info

£12.76 INC VAT
TREND SNAP/GD/3MM SNAPPY GLASS DRILL 3MM
TREND SNAP/GD/3MM SNAPPY GLASS DRILL 3MM

TCT drill for use on glass, porcelain, tile and mirrors. Not for use on toughened glass. A coolant must be used. Dimensions: D=3 mm Shank Diameter... More Info

£7.11 INC VAT
TREND SNAP/GD/4MM SNAPPY GLASS DRILL 4MM
TREND SNAP/GD/4MM SNAPPY GLASS DRILL 4MM

TCT drill for use on glass, porcelain, tile and mirrors. Not for use on toughened glass. A coolant must be used. Dimensions: D=4 mm Shank Diameter... More Info

£7.11 INC VAT
TREND SNAP/GD/5MM SNAPPY GLASS DRILL 5MM
TREND SNAP/GD/5MM SNAPPY GLASS DRILL 5MM

TCT drill for use on glass, porcelain, tile and mirrors. Not for use on toughened glass. A coolant must be used. Dimensions: D=5 mm Shank Diameter... More Info

£7.78 INC VAT
TREND SNAP/GD/6MM SNAPPY GLASS DRILL 6MM
TREND SNAP/GD/6MM SNAPPY GLASS DRILL 6MM

TCT drill for use on glass, porcelain, tile and mirrors. Not for use on toughened glass. A coolant must be used. Dimensions: D=6 mm Shank Diam... More Info

£10.11 INC VAT

Previous Page
Next Page


[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21][22][23][24][25]

All lines on our website are not always stocked in store. Please call before visiting the shop to check stock levels.

----------------

Opening Hours

Weekdays:  9am to 5pm

Saturdays:  9am to 12 noon

Sundays:  Closed

----------------

For Safety the number of Customers at any one time is restricted. 

If you have forgotten your mask we can serve you at the door.

----------------

Ultra
Bailey
Emir
Duck Tape
Plasplug
  Terms & Conditions  
Powered By TABS For Tools We Accept Visa, Mastercard,Maestro,Solo,Visa Electron and Detla.  

© 2025 Wokingham Tools  
Saturday 17th May 2025