
Home	About Us	Contact Us	Help

Trend

TREND SNAP/GD/6MM SNAPPY GLASS DRILL 6MM

TCT drill for use on glass, porcelain, tile and mirrors. Not for use on toughened glass. A coolant must be used. Dimensions: D=6 mm Shank Diam... More Info

£10.11 INC VAT

TREND SNAP/GD/7MM SNAPPY GLASS DRILL 7MM

TCT drill for use on glass, porcelain, tile and mirrors. Not for use on toughened glass. A coolant must be used. Dimensions: D=7 mm Shank Diam... More Info

£11.03 INC VAT

TREND SNAP/GD/8MM SNAPPY GLASS DRILL 8MM

For use on glass, porcelain, tile and mirrors. To be used in drill presses and portable drills The spear point is a fully ground profile tip for clean... More Info

£8.47 INC VAT

TREND SNAP/HAND/1 SNAPPY QC HAND DRIVER

This quick chuck with a sturdy handle, allows the use of all Snappy shank direct drive tools. Supplied with a magnetic screwdriver holder and No.2 Po... More Info

£12.76 INC VAT

Trend SNAP/HD/Set Drill Set 7 Piece

The HSS drill bits are gripped by a spring steel collet into the hex shaft. The hex shanks snap into the quick chuck. The hex collar is supplied in th... More Info

£14.90 INC VAT

TREND SNAP/HD/SET SNAPPY HEX DRILL SET METRIC 7PC

A set of seven quick change hex shank through hole drilling timber. Supplied in a storage tube. Dimensions: Shank Diameter=1/4 inch hex Drill di... More Info

£13.84 INC VAT

TREND SNAP/HEX/A SNAP HEX BIT BALL END 2MM 2.5MM 3MM

A 50mm ball end hex screwdriver bits. The ball hex allows a working angle up to 20 degree. Dimensions: Shank Length=1/4 inch hex ... More Info

£16.41 INC VAT

TREND SNAP/HEX/B SNAP HEX BIT BALL END 4MM 5MM 6MM

A 50mm ball end hex screwdriver bits. The ball hex allows a working angle up to 20 degree. Dimensions: Shank Diameter=1/4 inch hex Shank Dia... More Info

£15.63 INC VAT

TREND SNAP/HEX/C SNAP HEX BIT BALL END 7MM & 8MM A/F

A 50mm ball end hex screwdriver bits. The ball hex allows a working angle up to 20 degree. Dimensions: Shank Diameter=1/4 inch hex Shank Diameter:... More Info

£19.86 INC VAT

Trend SNAP/HKLC/6 Keyless Chuck

The Trend SNAP/HKLC/6 Keyless Chuck can be used in quick chucks and impact drivers to hold parallel shank drills bits up to 1/4 inch. Clamping capaci... More Info

£23.70 INC VAT

TREND SNAP/HP SNAPPY HEX PROTECTOR FOR 1/4 HEX

The hex collar enable drills to be removed with two spanners.... More Info

£2.48 INC VAT

TREND SNAP/IPH1/10 SNAPPY 25MM BIT PHILLIPS 1 TEN TIN

A pack of ten 25mm No. 1 Phillips 25mm insert bits Titanium nitride coating (TiN) coated. They have a round shaft to reduce breakage giving excellent ... More Info

£9.92 INC VAT

TREND SNAP/IPH2/10 SNAPPY 25MM BIT PHILLIPS 2 TEN TIN

A pack of ten 25mm No. 2 Phillips 25mm insert bits Titanium nitride coating (TiN) coated. They have a round shaft to reduce breakage giving excellent... More Info

£12.92 INC VAT

TREND SNAP/IPH3/10 SNAPPY 25MM BIT PHILLIPS 3 TEN TIN

A pack of ten 25mm No. 3 Phillips 25mm insert bits Titanium nitride coating (TiN) coated. They have a round shaft to reduce breakage giving excellent ... More Info

£9.44 INC VAT

TREND SNAP/IPZ1/10 SNAPPY 25MM BIT POZI NO1 TEN TIN

A pack of ten 25mm No. 1 Pozi ¨ 25mm insert bits Titanium nitride coating (TiN) coated. They have a round shaft to reduce breakage giving excellent to... More Info

£9.92 INC VAT

Trend SNAP/IPZ2/10 25mm Bit Pozi No.2 (Pack of 10)

Titanium coated high grade tool steel for extra wear resistance to Cam Out.Type: No 2 Pozi BitsLength: 25mmQty: 10... More Info

£10.69 INC VAT

TREND SNAP/IPZ2/10 SNAPPY 25MM BIT POZI NO2 TEN TIN

A pack of ten 25mm No. 2 Pozi ¨ 25mm insert bits Titanium nitride coating (TiN) coated. They have a round shaft to reduce breakage giving excellent t... More Info

£12.92 INC VAT

TREND SNAP/IPZ2P/BH SNAPPY 25MM BIT PZ2 TEN PLAIN & BH

Dimensions: Overall length=25 mm Size=No.2 Pozi¨ 1/4 inch Hex insert bit shank DIN3126 C6,3 Hardness=2500+/- 400HV Overall Length Metric: 25... More Info

£11.78 INC VAT

TREND SNAP/IPZ3/10 SNAPPY 25MM BIT POZI NO3 TEN TIN

A pack of ten 25mm No. 3 Pozi ¨ 25mm insert bits Titanium nitride coating (TiN) coated. They have a round shaft to reduce breakage giving excellent to... More Info

£9.92 INC VAT

Trend SNAP/MAG Magnetic Holder For Screws

Magnetic screwdriver holder. Designed to hold longer screws securely on to the screwdriver bit, with an extra magnetic ring. Accepts 25 mm insert bit... More Info

£16.01 INC VAT

TREND SNAP/MAG SNAPPY MAGNETIC HOLDER FOR SCREWS

Designed to hold longer screws securely onto the screwdriver bit with an extra magnetic ring. Accepts 25 mm insert bits and has an adjustable barrel.... More Info

£14.85 INC VAT

TREND SNAP/MB/15TC SNAPPY MACHINE BIT 15MM DIA TC

The 15mm machine bit is designed to suit cam and dowel fixings. It is recommended that these bits are used in a drill stand. Dimensions: D=15 mm ... More Info

£10.94 INC VAT

TREND SNAP/MB/26TC SNAPPY MACHINE BIT 26MM DIA TC

For drilling blind holes for circular hinges in kitchen and cabinet doors. Recommended for use in a drill stand. Dimensions: D=26 mm Overall length=... More Info

£13.42 INC VAT

TREND SNAP/MB/35TC SNAPPY MACHINE BIT 35MM DIA TC

For drilling blind holes for circular hinges in kitchen and cabinet doors. Recommended for use in a drill stand. Dimensions: D=1 3/8 inch D=35 m... More Info

£22.54 INC VAT

TREND SNAP/MB/40TC SNAPPY MACHINE BIT 40MM DIA TC

For drilling blind holes for circular hinges in kitchen and cabinet doors. Recommended for use in a drill stand. Dimensions: D=40 mm Overall len... More Info

£23.04 INC VAT

TREND SNAP/MD/10 SNAPPY MASONRY DRILL 10MMX150MM TC

Tungsten Carbide Tipped masonry drill to suit wall plugs. Dimensions: D=10 mm Overall length=150 mm Shank Length=1/4 inch hex Diameter Met... More Info

£7.00 INC VAT